Neff Logo

Neff Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 165 Products
  • 3K Answers
  • 304K Views
0helpful
1answer

My Neff dishwasher is showing E15 code plus showing a light on the tap symbol. I have had to switch it off at the plug as it keeps making a noise when switched off?

Could be an over fill issue causing water to leak into the base. What you need to do is pull the dishwasher out and lay it on its back and this will allow the water to drain out from the base.
3/21/2024 9:29:33 AM • Neff Dishwashers • Answered on Mar 21, 2024
0helpful
1answer

Neff dishwasher tap light flashing -

If your Neff dishwasher is showing a flashing tap light, it typically indicates a water supply issue. Here's a short guide to address the problem:
  1. Check Water Supply: Ensure the water supply valve under the sink is fully open.
  2. Filter & Hose: Examine the inlet hose for kinks or bends and the filter at the connection point for blockages.
  3. Water Pressure: Low water pressure can also trigger this warning. Verify that your home's water pressure is adequate.
If these steps don't resolve the issue, there might be a more complex problem, such as a faulty water inlet valve or a problem with the dishwasher's control system. In such cases, consulting the user manual or contacting Neff customer support for further assistance would be advisable.
3/10/2024 7:23:52 AM • Neff Washing... • Answered on Mar 10, 2024
0helpful
1answer

Neff U1422 oven grill tripping RCD

The grill element has an internal short and needs replacing. Sometimes you can see it as a slight bulging of the element. This happens just before it blows a hole. It may also have been physically damaged when something was put in there after a few Sherries. :>D Sounds like your RCD is adequately sensitive.
1/2/2024 7:05:55 PM • Neff Ovens • Answered on Jan 02, 2024
0helpful
2answers

I have a neff dishwasher showing an error 25 code

They discuss code 25 on this site: https://www.youtube.com/watch?v=zDHXtu-FaQg Also, here is a good video on You Tube: https://www.youtube.com/watch?v=-fQZ8p2yEJY
12/12/2023 10:14:53 PM • Neff Dishwashers • Answered on Dec 12, 2023
0helpful
1answer

Problems with touch keys on Neff B2ACH7HH0B Oven

See Troubleshooting section of manual on page 25. It may help untitled (neff-international.com)
11/8/2023 12:11:05 PM • Neff Ovens • Answered on Nov 08, 2023
0helpful
1answer

What do I need to do if I put rinse aid in the salt compartment, is that a problem?

Shouldn't be a problem. Top up with salt as soon as you can. That will avoid streaky glassware.
8/27/2023 10:27:42 AM • Neff Dishwashers • Answered on Aug 27, 2023
0helpful
1answer

Removing Oven element on a NEFF 1031-SP oven ( E-Nr B1120F1GB/01)

Check out this video on replaceing a element on a Neff. https://www.youtube.com/watch?v=YXMBwx3X74E Best to you.
8/26/2023 10:39:57 AM • Neff Ovens • Answered on Aug 26, 2023
0helpful
1answer
0helpful
1answer

Neff Steam Oven error code E5123.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiwgLHn8vL-AhURAzQIHRE9BqIQFnoECBsQAQ&url=https%3A%2F%2Fwww.fixya.com%2Fsupport%2Ft29925510-neff_steam_over_error_code_e5123&usg=AOvVaw1yI-sjEM1vvRntCUJzF6u2
5/13/2023 6:13:47 PM • Neff Ovens • Answered on May 13, 2023
0helpful
1answer

Neff error code E5123. What is it

I am not sure if this applies to your model as I translated it from German..... Error E5121, E5122 or E5123: Problem with the pump On FullSteam steam ovens, the display may show error codes E5121, E5122 or E5123. These indicate that either the pump or the water hose are clogged or calcified. To rectify the fault, proceed as follows: 1. Descale the device according to the operating instructions. 2. Use the special liquid descaler from our NEFF shop for this. 3. If error E5122 occurs when rinsing after descaling, it can be rectified by waiting about 30 minutes after inserting the tank with fresh water before closing the shutter and thus continuing the rinsing process. The pump then has time to cool down. It is particularly stressed during descaling and can cause the malfunction if it heats up.
5/12/2023 10:57:47 PM • Neff Washing... • Answered on May 12, 2023
0helpful
1answer

NEFF Hob Wok Ignition Not Working.

It sounds like there may be an issue with the ignition system specifically for the wok burner. Here are a few potential causes:
  1. Faulty Ignition Head: The ignition head may not be generating enough spark to ignite the gas. Since you mentioned that a weak spark can be seen when foil is placed between the ignition head and earth, this could indicate a weak spark from the ignition head.
  2. Dirty Ignition Head: If the ignition head is dirty or covered in grime, it may not be able to generate a strong spark. You can try cleaning the ignition head with a soft brush or a toothbrush to remove any debris or buildup.
  3. Loose Connections: Check to make sure all the electrical connections for the ignition system are tight and secure. A loose connection could cause the ignition to fail.
  4. Faulty Spark Module: The spark module provides power to the ignition system. If it's faulty, the ignition may not work properly. However, since the other burners are working fine, it's less likely that the spark module is the issue.
If none of these solutions work, it may be best to call a professional to diagnose and repair the issue.
4/23/2023 7:41:41 AM • Neff Cooktops • Answered on Apr 23, 2023
0helpful
1answer

Neff T18FD36X0/01 display flickering,not staying on.

If the display on your Neff T18FD36X0/01 appliance is flickering and not staying on, there could be a problem with the control board or the display module itself. Here are some steps you can take to troubleshoot the issue:
  1. Check the power supply: Make sure that the appliance is getting power by checking the outlet and the power cord. You can also try plugging in another appliance to see if the outlet is working properly.
  2. Check the control board: If the power supply is fine, the next step is to check the control board. Turn off the power to the appliance and remove the control panel cover to access the control board. Look for any loose wires, damaged connectors or burnt components. If you find any issues, you may need to replace the control board.
  3. Check the display module: If the control board is fine, the issue may be with the display module itself. Remove the control panel cover and locate the display module. Check the connections and make sure they are secure. If the connections are fine, the display module may need to be replaced.
  4. Call a professional: If you are not comfortable troubleshooting or repairing the appliance yourself, it is best to call a professional technician. They will be able to diagnose the issue and recommend the best course of action.
Remember to always turn off the power to the appliance before attempting any repairs or troubleshooting. Safety should be your top priority.
2/26/2023 2:10:59 PM • Neff Ovens • Answered on Feb 26, 2023
0helpful
1answer

What wire goes to what terminal on Neff element

I suggest you should call an electrician if you have to ask this sort of basic question or speak to your supplier and get a wiring diagram with wire colours off them.
2/18/2023 1:04:11 PM • Neff Dryers • Answered on Feb 18, 2023
0helpful
1answer

I have a Neff Microwave FD 8601 its starting to not heat food up its old but I'm finding I have to place food in for longer?

If microwave is clean (nothing spilled inside) your magnetron is probably getting weak/going out. Don't take it apart it's very dangerous unless you know what you are doing. Scrap it and buy a new one. They aren't too expensive, even on a budget.
1/28/2023 9:12:33 PM • Neff Microwave... • Answered on Jan 28, 2023
0helpful
1answer

My NEFF integrated dishwasher will not fill

It sounds like there may be an issue with the control board or programming of your NEFF dishwasher. The fact that the impeller runs and the rotor arms spin when water is manually added to the sump, but the controller does not call for water when the sump is empty suggests that there is a problem with the communication between the control board and the water inlet valve. The round white device you mentioned that is located in the water inlet before the water inlet valve is likely a flow meter. It is used to measure the amount of water flowing into the dishwasher and send a signal to the control board to indicate when the appropriate amount of water has been reached. This device could be malfunctioning and preventing the control board from requesting water. It's also possible that the problem is with the level float and plunger that operate the micro switch you mentioned. If the float and plunger are not working correctly, the control board may be receiving incorrect information about the water level in the sump and preventing the dishwasher from filling with water. It is best to check the user manual for the dishwasher, it will have the troubleshooting section, you can try the solution mentioned there. If the problem persists, it is best to contact NEFF customer service or an appliance repair professional for further assistance.
1/23/2023 12:22:14 PM • Neff Dishwashers • Answered on Jan 23, 2023
0helpful
1answer

I can't remove the light bulb cover of my neff oven to change the bulb

A length of wood such as a dowel can be used with a mallet or small hammer. Place one end of the wood against the lamp cover so as to force it anti clockwise. Tap the other end gently.
1/21/2023 1:09:13 PM • Neff Ovens • Answered on Jan 21, 2023
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Neff Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39394 Answers

vince

Level 3 Expert

2530 Answers

Are you a Neff Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...