Digi Computers & Internet - Page 8 - Recent Questions, Troubleshooting & Support

TENGO UNA CAMARA DIGITUS PERO EL DISCO DE INSTALACION SE DAñO Y LO AGARRA MI COMPUTADORA, NECESITO QUE ME AYUDEN PARA YO PODER UNAR MI CAMARA NO SE COMO HACERLE, LE AGRADECERIA BASTANTE ME PUDIERA AYUDAR.


GRACIAS


ATTE. WENDY

Try these generic Windows 98 USB Mass Storage Device Drivers:
http://www.technical-assistance.co.uk/kb/usbmsd98.php

Are you running passive speakers if so try using a ground loop isolator this should stop any noise interferance.

try again this seaching the computer for it

Not to grouch, but you should be more specific as I'm not sure of your specific needs.

In any case, here... take your pick.

http://www.digi.com/technology/wireless/products.jsp

All of these will out do the MaxStream for range. BPS is a different story.

If range were all you wanted, then I would go with the third from the bottom. If you need the bandwidth then the bottom is the best.

Of course I have no idea if your looking at this from a hobbyist’s point of view or from an industrial/mass production one because you did not specify. I assume you are a hobbyist and you want to buy just one unit and your not afraid to do some "adjustments" to whatever it is you decide get. If so, almost all of those units will happily modify to interface with TTL level logic and/or run off batteries.

-Charlie

i have NEC versapro va 86j Win 98 was initially installed in it but when i installed WinXP the sound lost. plz help me out i have no sound driver for this laptop please do it at ur earliest if feasible

Regards

Khurram Jamil

clean the ribbon cable connection on the dc power harness with contact cleaner. i had the same problem. this fixed it.

Reinstall the driver with the unit dissconnected. Check to make sure your version of OSX is stable with your current version of Protools, especially if youve done any software updates.


Keep me posted.

same here but when i pull up protools the mbox does not power on !!I have the imac g5

GO INTO SAFE MODE, WHEN TURN ON COMPUTER SHOULD SEE WRITING LOWER PART OF SCREEN WITH OPTIONS
GOTO REMOVE PROGRAM OR SOFTWARE OR MAC REQIURE UNINSTALL SOFTWARE IF NOT CONTACT THE PROGRAM MANIFACTURE ON HOW UNINSTALL OR GO TO THERE WEB SITE TO IF OUT HINTS ON REMOVAL PROCEDURES
THANK YOU
CANDYMANGANDY

Try opening windows explorer

e.g My documents or My Computer

Do a search for *.avi and you should find the file

sound driver problems

hi well my gateway laptop has not make any sound.would you help??

salut

i have a digital cam but i have lost the driver

well, here's a firmware update for the os x

http://www.digidesign.com/index.cfm?navid=54&itemid=23310&downloadid=29681&eid=0

maybe it'll help you.

You have to select the port in Pro Tools, but the computer has to recognise the MIDI port first.Does P.T. see that you have a MIDI port installed? Did you select an instrument plug in and map the keyboard as the controller for the plug in? You may need to use a utility like MIDI Yoke or MIDIOX to map the port if you are using Windows. You also have to have the drivers installed so that Windows recognises it as a MIDI port. If it is on a Mac you may have to use the Audio/Midi setup up utility to add the midi port.

Best of luck, Let me know if I can help further.

Double check and Ensure your headphones work.
Ensure that the master level is turned all the way to the right (Playback). I would also check that the main audio out of the Mbox is functioning so use two TRS 1/4" [balanced] cables to and amp and speakers to ensure master output jacks give you the same result. If they do chances are the Mbox is bad, if not it could be just the headphone preamp is bad