Questions & Answers for: Nissan Maxima wiring fog lights beams

...is good .the high beam is working just the low beam is not working.. Hi, You may need to check the wiring or the 3 terminal connector with special attention to the wire/connector of the low beam. In ...

2000 nissan maxima low beams (both) failed, high beams and fogs both work. What may be cause and solution? Check fuse panel as well as power distribution under hood , it may be on a separate fuse.

I have no low or high beams only 1 fog light 2006 nissan maxima Check for the fuses,and also check the bulbs

my high beams dont work neither do my fog lights or pass side tag light. its a 2006 nissan maxima. CHECK FUSE TO TURN SIGNAL OR COMBINATION SWITCH.IF FUSE GOOD PROBLEM COULD BE IN COMBINATION SWITCH.

...fog lights not working 2005 maxima. is there a fuse for the fog lights? Check to make sure that the bulbs are good first, then check your head light/ or head light fuses which may be located in a ...

...fuse Yes there is normally a separate fuse,check in fuse panel or manual should be titled driving lights or fog lights. Or possibly the switch to turn them on and off went out. Let me know, thanks ...

...fog light fuse but that is wrong . I want to hook up to the low beam circuit of the car so that the driving lights can only be used when the car is on low beam . I do not know where I have to connect ...

...wiring a fog light power line into the fuse for the blower everything worked fine then I turned off the lights and the entire car died blew the blower fuse and i replaced the fuse still no power to ...

...lights , both beams will work so the switch is the last item to consider Now with only one side beam not working it comes back to the ground on that light for that bulb remember that electricity ...

...lights and fog lights not working HELP! headlight not working even after change - Nissan Forums ... www.nissanclub.com/...nissan-altima.../302674-help-headlight-not-worki... Apr 1, 2010 - 13 posts - ...