...tom logo).The unit will NOT turn off and will NOT reset (either holding the on/off button for two seconds or not).The card seems to be o.k. and the unit's charge light comes on when placed in the ...
...holding the power button down until the Tom Tom trademark appears, let it cycle. You might have to do the power up cycle several times. There is no other fix, and by the way this bug will repeat ...
...tom home but no luck i have had similar problems with and sometimes it had to do with overcast not being able to signals from receivers, and the roff in my truck blocking initial signal- had to hold ...
...tom keeps going off and on Do a soft reset by holding the power button down for 15 seconds. then power on and off. it should work. It did for me. if not, call tomtom. they are willing to help ...
...tom comes on but,no gps signal lost for hours. you turn on the gps funtion work but gps signal dose not come in yet waiting for a valid gps signal even as we speake and that's been over 6 hours ago, ...
holding the power button down for at least four seconds to get the Tom Tom to fully shutdown. You will know you successfully did this if you hear the tom tom sound and a warning message appears during
my tom tom is frozen no signal Hi, Hold the power button for 20 seconds and let me know if it works. Hope this works
tom tom stuch in no valid gps signal Power it down and let it be off for a while. There may be a reset by holding down a button while turning on. Check your manual.
tom tom by holding the reset button for a while, after doing that, it will reset it and it will be able to receive signals. Solution: Reset the tom tom by holding down the reset button for a while, it
Usually answered in minutes!
1,678 Questions
1,343 Questions
1,187 Questions
1,096 Questions
889 Questions
