bobbin threading How do I thread the bobbin on my New Home SX-2122 sewing machine? Unthread the machine Open the top of the machine and take the thread and place it through one of the whole in the ...
threading the bobbin at the slot on the left side of the "latch", then move up to the next slot and pull it down into the slot, then you are ready to pick up the bobbin thread with the top thread. The
Question about L-373 Mechanical Sewing Machine
the thread knots up under the feed dog on about the second stitch I have sewn several seams but now it just knots up. Could I have it threaded wrong hi! well, you can try to set up your thread ...
threading a bobbin on the new home 2014le need instructions for threading a bobbin on the New Home 2014le. no instruction manual. place spool of thread in , route it towards your bobbin holder, take ...
machine is jammed and will not budge,,,hand wheel will not turn Look into where the bobbin is. Did you break a needle and part of it is jammed in the bobbin shuttle? Did you have a thread binding ...
bobbin thread not sewing tight my bobbin thread on my SX2122 is not sewing tight, top stitch looks fine, bottom thread is loose and I can easily pull it loose. It is the computerized machine, was ...
my needle won't grab the bobbin thread I have the following correctly installed: needle, thread, bobbin, Shuttle Race, but my needle will not pick up the bobbin thread. Please put on correct size ...
Question about HF-106
...up and causes the machine to jam. the looping on the underside sounds like a needle thread tension problem. 1st off check top (needle) threading then turn machine by hand to pick up bobbin ...
my thread keeps jamming in the shuttle race try a new needle try a different bobbin and make sure the bobbin is turned the correct way in the bobbin case make sure the top thread has not come off the ...
Trying to fix tension in new home 605 Loops underneath Loop and nesting on bottom side is usually top thread tension too loose (no tension) but can be bobbin thread tension issue. Be sure to thread ...
Usually answered in minutes!
52 Questions
38 Questions
29 Questions
31 Questions
25 Questions
