Questions & Answers for: thermostat re con

...Does the Honeywell RTH2308 thermostat have a delayed start setting? Can I adjust it? If so, how? You will have to have the installer manual and go into the con fig settings to change ...

blinking re co on thermostat My thermostat has been showing RE CON blinking on the indicator panel. What does this mean? It means that you are going into from one program to another program.

...con system we are freezing! Please help Ask the hvac technician, What is a dummy thermostat? Cause when you have too many peoples controlling the thermostat, you leave the thermostat on the wall and ...

...thermostat settings and make tempreture correct and setting on cool mode then i hope if it,s only normal problem then your air con will work again . after that if not get cold then contact to air con ...

...con freezing air con works great but it freezes up the vents then no air can come out how do you adjust the ac thermostat ac compressor relay sticking closed or low side pressure sensor

...con wasn't on. The thermostat on the wall was flashing an L on the screen but the green light was on the honeywell. If I press any of the buttons it doesn't do anything. I've switched it off and back ...

...Con won't turn on. The thermostat only controls an air con for cooling. No heating is involved. The unit had not been used for a few months and when I used the thermostat to turn it on yesterday the ...

...It could be the thermostat is not set of configured properly. Find the instructions and wiring diagrams for both the thermostat and the air-con to double check wiring of the thermostat to the ...

...con engine cooling fan on sooner than normal things to check check coolant level replace thermostat fan relay or resistor check coolant hoses and clamps for leaks faulty thermostatic fan motor ...

...thermostat is opening, check that the radiator core is free from rubbish, check the air con fan comes on with the air con switch,make sure the squealing is not coming from binding brakes, check the ...