Questions & Answers for: sata port

sata 3 port on motherboard sees sata drive as a floppy drive I had main sata plugged into sata 1. DVDRW sata was plugged into sata 3. All worked good. Then I plugged two more satas into sata ports 2 ...

...SATA port 1. Your second SATA drive must be connected to SATA port 3. See page 2-26 in your manual. All SATA drives are seen as master drives. Once the two SATA drives are connected (As per manual), ...

...SATA port in Motherboard The blue ports on this motherboard are SATA ports. This is a SATA cable: If this is eSATA, you must have an eSATA adapter card. If this is regular SATA, just plug it into the ...

...it has more than one SATA port, it has a dual core proc, so I would assume it has at least 4 sata ports. Below is the link to the spec sheet. ...

i need to know where to plug in on motherboard If its having sata connection you can see sata ports on *********** board using sata cable 1.Pic of sata cable 2.Pic of Sata ports on mother board You ...

SATA port for SATA ports left and you were broken. what about the other SATA port? if there is, use the other SATA port for your SATA and SATA cut the pin is left, do not let it come into contact with

...sata port on it , In the bios i can't see the SATA port and i can't install windows xp on my SATA HDD, in the bios there is only showing the IDE ports as available and dont recognuzed the he new SATA ...

...SATA only allows one device per port. If the problem is that you don't have any SATA ports in your computer, you can get a SATA host adapter card for your system, update your motherboard to a ...

SATA port, with the same standard SATA data cable, Windows doesn't recognise it at all. The SATA drive appears on the RAID Utility in the first instance (IDE-to-SATA) but not the second (SATA-direct).

...SATA port over on the motherboard. The SATA ports on the motherboard are listed as 0,1,4,&5. In BIOS the SATA ports are 0.1.2.3.4. & 5. I have been trying to turn on 2 or 3 as they are the ...