Questions & Answers for: reset print server dp 301p

...print server with me i dont know the password what that company admin set to psadmin I want to reset this at any cost please tell me how should i do that viaujocposted a brilliant solution which ...

print server even if you don't know the IP address. The only requirement is that the DP-300U has to be in the same network (subnet) as your PC running PSAdmin. In the PSAdmin, you will then be able to

...same LAN with the current ip of the print server). Then click on Tools TAB, click on "Reset" at left. You should see "Do you want to restore this device to factory default setting?". Click on

...Print Servers are secure and cannot be reset without the password. The unit will have to be sent to D-Link to be reset. Please contact our RMA department at 800-326-1688 M-F 7AM - 6pm Pacific time to ...

...it is), you can reset the device to factory defaults from the Tools menu in the web configuration utility. Be aware that you will lose all settings in the print server when you do this. Cheers ...

...Print Server D-Link 300U. Please tell me , that how to reset the IP usually by resetting it. pushing the reset button on the back it (tiny hole on the back) for 30 seconds, while plugged in to

...reset the administrator password of the D-Link DP-301P+ hi i forgot password Printer Server D_link Dp-301p Please Help Me Solved in ...

...Hi As far as I can remember the default IP is 192.168.0 .10, subnet 255.255.255.0 If this isn't the correct IP address, you'll need to reset the d-link print server Hope this helps Regards, ...

...print server and i would like to reset it can you help me to do this, the device don't have any reset button I am looking for a solution as well. Some have said to login as psadmin and use SYSXXXX ...

...reset the print server D-Link DP-301P+. I forgot IP address which I was changed according to network settings. There are two steps that we can suggest, A) 1) Install the psadmin software if you have ...