Questions & Answers for: Toyota remove cover

...remove valve cover to replace gasket. valve cover gasket leaking You have to remove the spark plugs cables and remove the four nuts that you see when the cables are removed. When the four nuts are ...

...covers prevent you from reaching passenger side. Do you remove light assembly or plastic cover and if plastic cover, how do you remove it? Remove the plastic cover. No need to remove the

...cover is removed, it will expose the bolt that you need to remove to remove the armrest. Hint: tape the end of the scrwdriver so you do not deform the plastic cover or the part that the cover fits ...

...remove all 4 of these. Also on the top timing belt cover there are 2 10mm head bolts you will need to back out at least 1/2 way for 2 reasons. 1 to free up the wire harness that crosses there and the ...

...there are plastic covers directly on top of you lug nuts remove with four way or socket clockwise direction these plastic caps will screw off releasing wheel cover. then remove lugs. hope2help ...

...remove valve cover to replace valve cover gasket REMOVAL & INSTALLATION 1C-LTC and 2CL-TC Engines (see Figures 1 and 2) Disconnect the negative battery cable. Remove and label all electrical ...

...Remove the cover mounting bolts, then pull off the cover. Remove and discard the gasket. Pull the cover off Remove the bolt with washer. Using the correct size wrench, loosen ... ... then remove the ...

...COVER RH...REMOVE STARTER ASSEMBLY...(a)Disconnect the starter connector....(b)Open the terminal cover....(c)Remove the nut, then disconnect the starter wire...(d)Remove the 2 bolts, then remove the ...

...cover) 2. remove phillips screw now showing 3. push fabric panel (edge of door opener plastic cover-at hinged end of chrome handle) to allow uncliping of edge of plastic cover (top rt & lwr rt ...

...cover. Remove the cylinder head cover and the cover gasket from the cylinder head. Discard the gasket and replace with a new one. To install: With a wire brush or gasket scraper, remove all the old ...