Questions & Answers for: Toyota Camry rear strut

...rear strut and strut mount with new but still getting an annoying knocking in the same area as before what could be the problem? Whoever replaced the strut neglected to replace the "bearing support ...

changing rear struts need to take rear struts off to replace with new ones. do not know where to find the top bolt. You need to remove the rear seat bottoma and the rear seat backs. Then, remove the ...

rear struts on a 2003 Toyota Camry. How do you access the top part of the strut assembly Don't mess with struts unless you have a strut compression tool. You could get seriously injured. The nut is on

installed rear struts in toyota camry 2000 and abs sign came on installed new struts in rear and abs light came on desk board Check to see if you may haved damaged a ABS sensor at the rear hub , and ...

rear struts on my 1999 Camry myself? As long as you have the ready struts no. They come with the spring and mount already attached. If you don't, you better have a good spring compressor to remove the

...rear strut retention bolts were not tightened up properly at the tops of the struts two- the top supports on the struts were not replaced. Whenever we change the struts, we always replace the top ...

...speeds. I suspect the rear struts. Where do you think I need to focus? Sounds like you have a bad strut mount causing the rattle. I would replace the struts and strut mounts and get an

...rear struts need to be replaced. Is this the kind of sound that worn struts make? I would tend to believe it's more likely a worn sway bar bushing or link if it's a rattle or a small clunk, if it's a ...

strut replacement replace rear struts, jack up rear of car and place on jackstands. remove rear wheels there is two bolts that hold strut to the wheel assembly also unbolt brake line bracket now ...

What are the Front and Rear Strut lower two bolt nut torquing requirements? Are they really 221 ft-lbs? Front lower strut/ shock mount 155 ft/lbs. Rear lower strut/ shock mount 133 ft/lbs.