Questions & Answers for: oil spraying Sewing Machines

Bernina Deco 600 Hello, I noticed you recommended oiling the machine. I checked the manual and cannot find the proper place to oil it. Where (bobbin side) does the oil go? I was afraid it might affect

bernina 600 machine jammed due to not being oiled Try using some breakfree spray in oil slots.

...up and down. Is there a special kind of grease or oil I should use or could this be something else? Thank you, J.C. I would try spraying a spray silicone in the top. It would probably fix the

What kind of oil should I use to replace the existing oil on my Juki DDL-555? sewing machine oil or a silicon spray

spraying into the looper area and at other inside parts. As far as oiling goes, the left platform of the machine opens up without unscrewing anything, by pushing it to the left. There, is what appears

my machine is very squeaky when I run it...where do i put the oil? it is a europro 605d This is quite a question as the noise normally comes after drying of the oil points in the machine. So first of ...

...possible speed Hello Thomas Rugg try to clean and replace the carbon brass of the motor put some oil or spray with

Why is there no oil movement in bubble on top of machine? My machine has oil to the HIGH line but there is no oil coming up to the clear bubble on the top of the machine... Is this okay? I'm afraid to

How do I oil my Janome 10001? The hand wheel is very tight. I have oiled under the bobbin case. The oil does not soak away. Where else should I oil. There are no directions in the manual. Hi Helen A ...

...noise. the only error is an exclamation mark, no error code. Wheel is very stiff to rotate. Any ideas? This Maching needs a good clean and spraying with WD-40 OIL but be carefull not to over ...