Questions & Answers for: Mitsubishi Mighty Max knocking valve

Question about 1993 Mighty Max

1 Answer

OIL ON TOP OF VALVE 1993 MITSUBISHI 2.4 ENGINE, WHEN LOOKING IN THE EXHAUST PORT WITH THE EXHAUST MANIFOLD REMOVED FROMM ENGINE I CAN SEE OIL ON THE TOP SIDE OF THE EXHAUST VALVE ON THE NUMBER 1 ...

Ad

Question about 1991 Mighty Max

2 Answers

Need the valve gap for 1991 mighty max I need the valve gap for intake and exhaust for a 1991 mighty max. Engine is 2.4 litre. Manual transmission. Does not have adjustable valves . It has hydrolic ...

Ad

Question about 1987 Mighty Max

1 Answer

EGR Valve needs cleaning or replacing I need to clean or replace the egr valve but cannot find an accurate engine diagram or instructions on the internet. Can you help me to accurately identify it and

Question about 1994 Mighty Max

1 Answer

diesel 4wd smoking blowing a little oil out of exhaust and blowing smoke when accellerating hard,running ok Check to make sure the PCV Valve is working...when you remove it from valve cover and shake ...

Question about 1987 Mighty Max

1 Answer

engine knocking I have a 1992 mitsubishi mighty max and i have a knocking noise in the valve train but it doesnt sound like a lifter. could be a valve out, and or loud injectors

valve spring compressor, and replace the stem seals. It will take about 100 psi and you will want to replace the seals one at a time. You should be able to buy the air compressor fitting for the spark

Question about 1991 Mighty Max

1 Answer

need to know how to adjust the valves On Vehicle Inspection If a clanging noise due to the lash adjuster produced immediately after the engine has started or during operation persists, perform the ...

Question about 1989 Mighty Max

1 Answer

i put timing belt on 1989 mitsubishi mightymax and timing marks seem to all line up just seems like the camshaft mark is off by one tooth so i moved it that one tooth and started it up and and u can ...

i broke my timing belt on a 1994 mightymax and want to know if i can just put new belt on or did i bend valves just want to know if the valves clear when the belt brakes no they dont clear they hit ...

I have a 1988 mighty max that I bought with a rod knock. I have tore the bottom apart and replaced the cranck shaft and bearings ( main and rod) now that it is back together I am having idle trouble. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...