...ip to whatever you want. Also the PS admin software has to run on XP or lower. It won't run on anything higher: vista or win7. Luckily I had my trusty xp laptop with me. Another thing: I could not ...
Question about DP 301P (DP-301P) Print Server
...Ip of D-Link DP 300U print server I Forgotted the Ip of D-Link DP 300U print server. Is there any way to change the IP address???? You may use the PSAdmin software to configure your print server even ...
Question about DP 301P (DP-301P) Print Server
...IP for print server is manually configure. ANy help? Yes. In most cases you can reset your D-link DP-300 series or DP-301 series print server yourself even if you don't know the password or IP. This ...
...IP Address of DP-301P+ is set as automatically getting from DHCP server or Router with build-in DHCP server. Please note that the PC's IP Address must be in the same subnet as the print server's IP ...
...Hi As far as I can remember the default IP is 192.168.0 .10, subnet 255.255.255.0 If this isn't the correct IP address, you'll need to reset the d-link print server Hope this helps Regards, ...
...Link DP-301P+. I forgot IP address which I was changed according to network settings. There are two steps that we can suggest, A) 1) Install the psadmin software if you have not already. If you have ...
change ip address i allardy ip confuger but i dont no ip The IP address is configured through your DHCP server in your router. You're going to have to either look in your router for connected devices ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions