Questions & Answers for: Yamaha idle

Fast Idle I Have a Yamaha 750 special and I need to slow the idle down. It idles at a little over 2000rpm's I need to get it down to approx. 1000rpm's. My problem is that I don't know which screws to ...

i can not get my yamaha blaster to idle have i can not get my yamaha blaster to idle have stripped carb and cleaned but it still wont ildle Make sure you have no vacuum leaks and the idle screw is ...

my vstar 1100 dies when in idle. acceleration is fine. driving, shifting, everything else is fine. when the bike is coming down to idle, it dies Is the idle speed set too low? If so, adjust it, using ...

My 1987 yamaha 80cc big wheel will not idle. would like to know how to adjust air mixture and idle screws? well first try the choke if it runs good when you pull the choke even a little then you need ...

my 426 doesnt idle smoothly. have to keep it reving to stop it stalling. have tried adjusting the idle screw, runs fine apart from the idle... Replace Gold idle screw on the carb and then keep turning

wont idle how to adjust carb Make sure your spark plug is not fouled and the gap is correct, also air filter is properly cleaned. If it still wont idle, locate the idle adjustment on the carb. There ...

my 1981 maxim 650 idles high. what is the correct idle setting and how do i adjust my idle seems right when the bikes cold but as it warms up the idle rpm climbs and the bike backfires Hi, Robertshenk

2006 v star 1100 classic w/ vance + hines slip on exhaust. I get popping at idle and decel (i'm thinking it just needs to be rejetted). The big problem, is when the bike has already warmed up (at ...

06 v-star 1100 when twisting throttle and then back to idle position it takes a while to idle back down or stays at high rpm when cold will not idle at all till warmed up a bit then wont idle down or ...

once bike gets over 3000 it sticks there. (hanging idle) its not any obvious reasons like a stuck throttle cable or dirty pod filters. could it be a sticky auto advancing unit? or could it be a vacuum