Questions & Answers for: husqvarna chainsaw starts dies

Husqvarna model 345 chainsaw Saw worked fine for a 20 minutes or so, then instead of idling it would die. Re-started easily. Thought it was possibly overheating, so let it cool down for an hour or ...

Chainsaw runs but when I start cutting it dies I have a STIHL 026 that starts fine but when I start to cut wood it strugles and then dies. you might just neet to clean the air filter and/or the carb.

My Husqvarna 136 S/N 91VG/56 runs about 1/2 min. then dies. Start it again and it runs about 1min. and dies. check air leaks between cilinder and carburator, if its ok- fine, check rebuid carburator.

Husqvarna 41 model chainsaw. It starts fine and runs, however as soon as I let go of the gas it dies. It seems like it is not getting enough gas. Any suggestions? check crankshaft sealings. if between

Husqvarna 51 idle seems to struggle, runs OK when I throttle then chokes and dies out as soon as the throttle is released. What can I do? will it start right back up after it dies? you could use a ...

husqvarna 455 rancher Starts fine and runs great for about 5 mins. Stalls and wont restart until cold. Problem than repeats Try removing the fuel cap for a moment to see it can be restarted ...

Chainsaw stops running rebuilt carburetor, replaced fuel filter, replaced air filter, cleaned saw all saw starts, runs a wile then dies When it starts to die slacken off the fuel cap enough to allow ...

chainsaw cranks and runs but after minute or two it dies. will start again but dies when trying to throttle up Check the fuel tank vent. Does the saw leak fuel when laying on its side.? Faulty vent ...

...Husqvarna 141 chainsaw fires with the choke out but won't start. With the choke then pushed in it starts and runs very quickly (as they usually do) but then dies after a few seconds. I have ruled out ...

husqvarna die after I start it in cold weather -17c After I start my chainsaw, take off the choke the chainsaw runs for about 30 seconds then dies. I can restart it as long as I prime it, but it seems