Questions & Answers for: humidifier solenoid

...humidifier. Do I replace the solenoid valve or is there another solution? You need to determine whether the problem is in the solenoid or in the furnace electronics. You could put a voltmeter on the ...

Ad

Question about HE360A1027 Whole House Humidifier Humidifier

1 Answer

...solenoid smoked a little and the humidifier stopped. Any insight? Sounds like you may have put 120v through a 24v solenoid and humidistat. Is the HUM terminal on the furnace 120v or 24v? If it is a ...

Ad

Question about 400 Humidifier

2 Answers

...humidifier and solenoid wires attached check the two lead wires with a volt meter for 24v. If you have 24v then you have a bad solenoid and need a new one. If no 24v then you may need a new control ...

...Humidifier 1998 solenoid replaced in 2004, this one stopped recently. I'm I testing correctl? Other reasons why selenoid isn't working? Thanks I am guessing you have sent 24 volts to the solenoid ...

Question about HE360A1027 Whole House Humidifier Humidifier

1 Answer

...the tube leading to the solenoid, but when connected the pressure builds but no water enters the humidifier. should be 2 wires going to humidifier you will connect wires from humidistat to

humidifier Solenoid (4040) on Aprilaire whole house humidifier (model 760) allowing water to run through. Is tiny hole inside metal core containing plunger supposed to allow air to pass if you **** on

Question about Power Humidifier: Furnace Humidifier/ Humidifier

2 Answers

WATER RUNS IN ALL THE TIME???? Bad selenoid possibly wrong wiring I has the same problem with mine.  The unit was in fact miswired.  The head unit red wires were connected directly to ...

Question about 1099-LH Humidifier

1 Answer

...humidifier does not work. No water flows through the unit when the furnace is truned on Hello, if there is water to the solenoid valve but not passing through it than the solenoid valve is ...

Question about 400 Humidifier

1 Answer

humidistat makes clicking sounds This may caused by a weak solenoid or loose wiring comncetions to the solenoid. Make sure all wiring connections to humidifier amd solenoid are tight and secure.

Question about 700 Humidifier

1 Answer

...remove mounting hardware. Here is a link to store which sells the solenoid needed for your humidifier. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Humidifiers Experts

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a Humidifiers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...