Questions & Answers for: how to replace cam sensor

Question about 1993 DeVille

1 Answer

...to know where the cam sensor is located and how to replace it. thank you It's inside the distributor. You need to remove the distributor, disassemble the distributor, to replace the sensor. ...

Ad

Question about 2002 Civic

1 Answer

cam sensor After replacing the timing belt my son left the cam sensor lose, now I need to tighten the cam sensor but I have not been able to find out what the clearance should be. Well most cam ...

Ad

...replace the crankshaft sensor or magnet sensor and the cam sensor on my 2003 Nissan Altima 2.5 The cam sensor is mounted in top of the engine on the right side of the engine where the tranny mounts. ...

Question about 1998 Explorer

1 Answer

...cam back into place, then replace the sensor? How critical is the tolerance? Any help would be appreciated. Thanks! ok easy fix. this is common on ALL ford w this style cam sensor,3.0 eats them for ...

How do I replace my cam sensors and crank sensor in my 2002 Infiniti I35. I have an 02, not an 04 simple check to see if is the bank 1 or bank 2 cam sensor do you a code for cam sensor

cam sensor I have a 2006 vectra ecotec engine and has the cam sensor replaced last week the car on my way home started to loose power again I called for recovery and they said it was cam sensor b that

...SENSER FALT HOW CAN I TEST OR IS THERE ANOTHER SENSER CONNECTED TO CAM SHAFT SENSOR Buy the sensor from the car dealership. The sensors at auto stores are inferior and sometimes do not work

...We replaced the evap. and the car will barely turn over. Can someone tell me how to access the cam to try and replace it? Are there any special tools required? Images for po343 cam sensor On the ...

...cam sensor replacement. Car stalling at lights.Code reader said cam sensor. Changed it but still stalling best to change cam and crank sensor as they both need to work together. if either one goes it ...

...cam sensor, that's good. The other sensors are the intake valve timing sensor, and a faulty crank shaft sensor. Not sure which one I would check first. You might be able to pull the sensor off and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...