Questions & Answers for: Chrysler how to add antifreeze

...add antifreeze to the engine hi, you can add two ways, one is threw the the over flow tank and the other is threw the radiator cap. i would flush the radiator soon. you may have sludge build up that ...

...add a bottle of gas treatment and it starts.Why? I was told it was the crank or cam sensor.How do I tell which? When was last set of new plugs & wires installed? reason I'm asking is that I had a ...

...add to any color antifreeze" it is ok....I have added it to mine with no problems.....watch the labels though, some say they can be used to "replace" any fluid but require a complete system ...

...antifreeze in a 1999 concord If it doesnt have a cap on the radiator itself youhave to add it through your overflow tank....If the car is low (be sure it is) add some there and it will **** what it ...

...Antifreeze every 60 months. So if you havent done it in the last 5 years its not a bad investment in time and materials. Remove the radiator cap and start up the engine. You have to wait for it to ...

...2 and you carnt plug it in then you will need 50/50 antifreez only and drain it out in summer and add coolant only. Have a goodday. ...

...with a garden hose .Then add the neat antifreeze any colour or make but it must be 100% ,depending on area and cold in winter use anything from 50% to neat stuff if you live in ice road truckers ...

...add antifreeze and/or water until at recommended levels (tip: buy straight antifreeze not 50/50). Some heater cores are copper and some are aluminum, I have not had problems using tap water on either ...

...a razor blade and make you get all of it off to prevent antifreeze from seeping through the housing. Reinstall is backwards and add new antifreeze, make sure you tighten bolts to 12 NM (105 inch

antifreeze/add_coolant Kecia, where are you putting in the coolant, that is where you want to add distilled water. Save yourself some trouble and buy premixed coolant then you do not have to add water