Questions & Answers for: Jeep Cherokee harmonic balancer

harmonic balancer rubbing on the timing chain cover i recently bought a 89 jeep cherokee 4x4 4.0 L. I noticed some motor oil under the motor. when i looked i thought it was the front crank shaft seal.

Ad

...harmonic balancer without a puller? Is there anyway to remove the harmonic balancer without a puller? If that cannot be done, if I rent a kit will It be able to remove the balancer without removing ...

Ad

Question about 1996 Cherokee Country

1 Answer

...harmonic balancer. Took the fan blades off and the belt still runs off the pulley. Something seams to be miss aligned but I cant see what it is. Your harmonic balancer is coming apart. The Balancer ...

...harmonic balacer off my motor with out taking it a part? You will need to remove anything interfering with a balancer removal tool. You will need to remove the drive belt and belt pulley from the ...

92 cherokee laredo 4x4 started squealing relized it was harmonic balencer replaced that plus belt now it has trouble starting if I hold peddle to floor it will start and run rough for about 1 minute ...

...is this part called and what the cheapest easiest fix? Harmonic Balancer There is no cheap part,if you go to salvage yard,you will get the same problem all over again,it is call the harmonic

Question about 1999 Cherokee

1 Answer

...harmonic balancer have to be replaced or is there a sleeve kit available that can be put on the existing harmonic balancer? I dont think its repairable. Once they come apart, u have to toss it. ...

Question about 1999 Cherokee

1 Answer

harmonic balancer for my '86 jeep cherokee. I need one for a v-belt type (it has two belts on the one balancer going different directions). the one i keep finding is for a serpentine belt. Don'

Question about 2000 Cherokee

1 Answer

...harmonic bal how to repair seal and balancer If you are talking about the rubber in the balancer itself. You can not do this. Balancers are fairly inexpensive. I would get one at a junk yard. I think ...

...harmonic balancer check the bolts that attach the pulley to the balancer to see if they are tight. Sometimes they can work their way loose. If it were a main bearing the engine would have a slight ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Jeep Cherokee
1998 Jeep Cherokee

1,380 Questions

1999 Jeep Cherokee
1999 Jeep Cherokee

1,162 Questions

1995 Jeep Cherokee
1995 Jeep Cherokee

698 Questions

2000 Jeep Cherokee
2000 Jeep Cherokee

672 Questions

2001 Jeep Cherokee
2001 Jeep Cherokee

659 Questions

Manuals & User Guides

Loading...