...goes in reverse. When you turn the dail to O it goes in reverse. The dail is somehow out of alinement and that is what I am searching for the adjustment that would bring the machine to O and the ...
goes back to reverse when I let go...It seems to be attached to a spring, inside. Possibly the top knob has not been installed correctly???? I have the same problem but for the husqvarna 2000 SL model
Question about 15516 Mechanical Sewing Machine
...goes reverse both ways. when you sew it goes reverse and when you press the reverse button it still goes reverse.. Does it have an automatic buttonhole? If so, is the pattern selector set on part of ...
Question about 15516 Mechanical Sewing Machine
goes in reverse model 385.15718500..(machine only goes in reverse now .) stitching is fine but machine reverse lever didn´t work... tried moving stitch length and width slides,out of frustration.
...reverse button is next to where you thread the cotton. as the thread goes down to the needle, there is a small cream tab approx 1.5cm long. This is pushed down when you want to ...
Question about 2005 Mechanical Sewing Machine
...reverse button doesn't work, on Viking 5710 so it only goes backwards when I start the machine it automatically goes backwards........the button in the middle of the middle dial doesn't engage and I ...
Question about 2005 Mechanical Sewing Machine
...for Flex stitch mode I The reverse lever does not go up or when turning the dial for flex stitches it goes down some, the stitches sew in reverse on the fabric. ...
Question about 2005 Mechanical Sewing Machine
...reverse; goes around a bit but then stops. What should I adjust to get it to work. The Juki has been in storage for years. I have oiled every oil point. Also, I can only turn the balance wheel when ...
Question about 2005 Mechanical Sewing Machine
...reverse button goes down, but doesn't do anything. What can I do? The machine is otherwise fine. TRY A LITTLE SILICON SPRAY LUBRICANT ON THE REVERSE BUTTON , IT SHOULD POP BACK UP IF IT DOES NOT THEN ...
Question about 2005 Mechanical Sewing Machine
...GOES IN REVERSE HOW CAN I SOLVE THIS PROBLEM Your reverse button is stuck. Try this before going to a professional. Unplug your power coed. 1) Place the stitch width to it's widest. 2) Remove the top ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions