stuck in glue gun and can't be removed. Make sure you plug in the gun so glue is soft if gun not getting hot the you have another problem My gluestick started to melt in my glue gun and now if i press
...to a friend and she left it on its side and now the glue is stuck in the inside. how do i get it out. i took it apart. my wife says put it in the freezer yes, freeze it so you can take it out in ...
...stuck inside the gun. Is the only solution to take the glue gun apart? i actually did this to one of my workshop guns i found the best way to fix it was to heat the gun up using a hair dryer and then ...
...glue stick is too small, or too slippery for the gun. If not that, then it's a mechanical problem. There are some screws on the side of the gun. With it unplugged and cool, take them out and open the ...
glue won't come out when heated up. The stick seems to have melted inside the gun. Now the insides are stuck together. I was using a 115V receptacle. Just read directions with gun, says to use a ...
foriegn object stuck in hot glue gun! What is the object? where is it stuck? depending on the answer to those 2 questions, the solution may differ
Question about Arrow Pro Glue Gun Tr550
...glue gun were I stuck a pencile in the hole in the back and now I cant get it out ????what to do ??? Turn on the gun so the glue heats up and then try to pull it out.If thatb doesn't worlk, you need ...
Question about Arrow Pro Glue Gun Tr550
stuck in my hot glue gun. I was trying to push out the rest of the glue out and the pencil broke and now it's stuck. How do I take it Out plz help!!! Heat the glue up an remove tube glue from injecter
Question about Arrow Pro Glue Gun Tr550
...stuck do u have any tips!! First try and get as much glue that is left in between the left over pencil and the tip out. Then find something that is the same diameter as the tip of the glue gun and ...
Usually answered in minutes!
33 Questions
31 Questions
28 Questions
20 Questions
19 Questions