flexible shaft out by removing the saft from the engine, but I can't figure out how to remove the housing & eyelet peice from the shaft housing. Is the housing and flex. shaft all one unit or is there
...Flexible shaft still has squared off end so it doesn't seem to be broken. What holds the cutting head shaft with the threaded end to the flexible shaft? Dealer says shaft has broken. Stihl had a ...
Question about 400 Series Xpr Rotary Tool Kit with Xpr Multisaw and Xpr Planer Attachment 400 - 6/90
flexible shaft not working all-in-one rotary tool hand tool part will turn on but flexible shaft will not work anymore check and see if you have the right collet insert in the chuck if it is too big ...
Question about 400 Series Xpr Rotary Tool Kit with Xpr Multisaw and Xpr Planer Attachment 400 - 6/90
...flexible drive shaft. Boom and trimmer get very hot after the trimmer runs for a while. I think the flexible drive shaft needs to be lubricated. I can not figure out how to get the flexible drive ...
...flexible shaft attachment . when i took flexible shaft off a piece appr. 2" long pulled out of shaft The part you need is available at most Lowes and Home Depot stores. You can also order it online ...
Question about 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned
...flexible shaft on my Ryobi EL15 trimmer shifts The flexible shaft on my trimmer shifts downward sometimes and doesnt mate with the trimmer head assembly. I can remove shaft housing and slide the ...
Question about 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned
pull the flexible shaft out of the inside. The replacement part number is 530056570 and should be about $12 to replace. Call the number on the unit to order replacement parts or go to your local sears
Question about 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned
my flexible shaft is broken how can i get a new onei need a new flexible shaft it is not working replacement flex shafts for dremels and craftsman tools are sold where ever there bits are sold
Question about 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned
...the shaft into the collett and tighten it then thread the outside of the flexible shaft onto where you disconnected the the front collar. You do not state model so I cannot give you exact ...
Question about 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned
flexible shaft or head is worn? Flexible shaft removed, inserted to engine, turns, but shaft end of weedeater will not turn, tried multiple times to seat, unable, attempted to disassemble head without
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions