Questions & Answers for: Jeep Grand Cherokee fan pulley

...pulley was forward of the other pulleys and idlers by about 3/4" and actually touched the fan. I removed the fan. I turned the engine over with a 3/4" socket and breaker bar. The bolt on the ...

Ad

Question about 1995 Grand Cherokee

2 Answers

...Water pump?? water pump Yes the water pump is leaking from the weep hole. jeeps known for this. don't drive long or this pulley can break and the fan goes through the radiator, destroying

Ad

Question about 1995 Grand Cherokee

1 Answer

...pulley attached 2 the fan and water pump moving as the fan rotates.......am I 2 replace the pulley, along with the water pump.....or will I be able 2 continue 2 use the pulley....and just replace the ...

Question about 2000 Grand Cherokee

1 Answer

...the outside of power steering pulley,under idler,over a/c comp,around alternator,over fan pulley, around crank pulley, over water pump. The backside of the belt contacts the idler, fan and water

...Fan belts can be replaced without removing the engine. 1) Get the new belt. 2) Locate the tensioner pulley and retract using the appropriate wrench. 3) Thread belt onto pulley's as shown on the ...

Question about 1996 Grand Cherokee

1 Answer

...fan-to-idler pulley nuts. Remove accessory drive belt. Remove 4 viscous fan to idler pulley nuts, and remove fan and shroud together. Remove 4 water pump pulley bolts and remove pulley. Remove power ...

Question about 1999 Grand Cherokee

1 Answer

Fan belt pulley Lost the top pulley for my fan belt, does it have a specific name? Sound like it's the idler pulley, if it's just bolted on there like a dummy pulley that's what it is IDLER PULLET.

Question about 1996 Grand Cherokee

1 Answer

...fan flange-to-pulley mounting nuts. Fig. 2: Remove the fan flange-to-pulley mounting nuts . . . Fig. 3: . . . then remove the fan assembly Remove the fan and viscous drive as an assembly. Remove the ...

Question about 1994 Grand Cherokee

2 Answers

...fan rubbing or the pulley? Did you possibly drop a spacer that goes between the pump and the pulley? Is the old pump aluminum and the new old cast iron? It is possible that the manufacturer made the ...

...fan pulley. The wp/fan pulley does seem to wobble and when checked moves side to side. There was a squealing sound prior to belt being replaced. Belt just slipped off while driving and had two torn ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...