Questions & Answers for: Dodge fan pulley

...Fan Pulley (5) Crankshaft Pulley (6) Automatic Tensioner (7) A/C Compressor Pump Pulley (8) CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may ...

...fan as you attempt this method. One hint that made my installs easy as pie...the last pulley you put it over should not be a bezeled and ridged pulley or you will needlessly make life difficult for ...

pulley just screws on but the fan dont come off, so how does the fan come off so i can get to the water pump. A special fan tool is required to remove the fan from the water pump. Yes it does unscrew.

...pulley from rotating. Do not attempt to remove fan/viscous fan drive assembly from vehicle at this time. If water pump is being replaced, do not unbolt fan blade assembly from thermal viscous Remove ...

...wide and 12-15 inches long and drilled 2 holes into it to line up with the bolts on the water pump pulley, and bolted it to the pulley to hold the pulley and a big wrench to loosen the clutch fan

...Fan pulley (1), Fan belt (2), Crankshaft pulley (3)-3.0L engine shown PROCEDURE Removal & Installation 2.7L Engine 1. Loosen the tension adjust and remove the A/C compressor drive belt. 2. Attach ...

...alternator pulley 2 under the water pump pulley 3 over the idler pulley 4 over the power steering pulley 5 over radiator fan pulley 6 over crankshaft pulley 7 automatic tensioner 8 over a/c if ...

...fan blade and around the crankshaft pulley. The crankshaft pulley is the big pulley at the very bottom of the engine. 6 Follow the routing directions from the belt routing diagram to install the new ...

...pully the water pump Hi, The water pump will be directly behind the fan pulley. The fan pulley mounts onto the water pump shaft. So no the fan pulley is not the water pump. Safe Journey's, ...

fan pulley wobbles water pump BRG, must change pump before it starts leaking . make sure its the fan pulley that is wobbling and not another idler or adjuster pulley.