engine and fix it, but i dont' have any information on how the timing belt is suppose to go in or to what degree it needs to be timed..... if I had engine number I could supply details,this is the eng
engine 4hf1 Timing is aligned with bolts through holes in the drive wheels under the timing cover and a mark on the crankshaft remove the timing cover turn the crankshaft until the mark is at the top.
...timing marks with the pointer dots on the back covers. Verify that the pointer on the crankshaft aligns with the mark on the lower timing cover. NOTE When the timing marks are aligned, the No. 2 ...
...engine timing specs say set to 12 degrees BTDC @ 900 rpms. **Make sure your engine is warmed up when you are checking and/or adjusting the timing.** Take a piece of chalk and search for and then mark ...
...timing belt marking at the engine before you start the work. then dismantle all the belt one by one until you reach the timing cover. mark the timing mark again. then start dismantle the timing belt ...
...engine Timing belt installation sequence-2.3L and 2.6L engines Timing belt tensioner lockbolt-2.3L and 2.6L engines If you have any comments please feel free to leave them here. Hope this helps and ...
Question about 1997 Rodeo
engine? to remove all timing belts made you put the engine at TDC mark. first. our V6s have SOHC and DOHC heads, and i cant guess yours. 3.2 L 6VD1/6VD1W V6?????????????????? just 2 engines there, see
Question about 1999 Rodeo
...engine and timing belt or just the engine? Just the engine. The marks on the belt are to make sure the teeth are in the right place when replacing. It might come back in place on 4 turns of the ...
timing lw3 engine Elaine, 93- 2.3L engines, turn the crankshaft to set the engine at TDC/compression stroke for the #1 cylinder. The arrow mark on camshaft sprocket aligns with mark on the rear timing
Question about 1993 Pickup
...engine timing marks for the cam,diesel pump and crankshaft on a Kb 300 tdi ,4jh1 engine Remove timing cover align all timing marks .may have to remove gears to align by turning untill marks
Usually answered in minutes!
832 Questions
814 Questions
819 Questions
720 Questions
623 Questions