Questions & Answers for: Toyota Camry crank pulley

96 toyota 2.2 changing timing belt cant get crank pullys off is bolt threaded backwards? and how are the crank and cam alined? thanks for any help. when i deal with very tie bolts at crakc pulleys, i ...

crank pulley there is a "V" cut out on the pulley, on the top pulley there should be a hole in the pulley spokes, behind the pulley you should see a notch, not a weld it will look different, line that

my diesel corolla car engine crank puly came out from the rubber bonding so please let me know wahat to do to bond the pulleys back to the crank pulley New only

...right there at the starter. it is a little piece of metal.remove it to gain access to the fly wheel or get someone to hold the crank pulley.you will also need a wheel pulley to remove the crank ...

...be to torched the BOLT untill it loosen up! Removing and torching it, might as well replace the CRANK OiL SEAL, carefull not to burn the CRANK PULLEY, some have a RUBBER insulation in the mid

...letter "E" that lines up with a detent. Also if you slide your crank pulley back on with the lower plastic timing cover installed, the notch on the crank pulley will line up perfectly to

...crank shaft pulley and now car runs horrible we replaced the crank shaft pulley and now the car runs really bad. right before pulley broke we tuned it up and it ran like a top. now it idles good but ...

runs horrible. just had a tune up before replacing pulley and it ran like a top and now it runs rough, no power,sounds like its missing. can anyone help? crank sensor damaged when changed crank pulley

crank shaft front pulley) does it? does IT spin cranking the engine? that is why its called cranking from hand cranked over engines. (like a lawn mower but with crank handles) and the name CRANK shaft

...crank pulley on bare metal. is this correct or has the crank pulley moved out wards from motor? The crank pulley is a 2 piece part, the outer pulley "ring" is insulated from the inner pulley by a ...