Questions & Answers for: Oldsmobile crank pulley

...crank pulley rib side around p/s pulley to alt pulley flat side on the left side of water pump  then rib side around ac pulley flat side around ...

CRANK to bottom of middle PULLEY - top of middle PULLEY to bottom of rear TENSIONER - top of TENSIONER to back to top of CAM. Remember the serpentine belt has ribs on only one side, the ribs face AWAY

...how hard is it to replacing the crank shaft pulley Not too hard if you have a pulley puller. Remove the belt, remove the crank shaft bolt, pull the crank pulley off, then reinstall in reverse

...crank pulley. it has to be lined up perfectly when replaced. You will understand when you remove the crank. Check the crank pulley very closely after you pull it off. they are noted for the rubber ...

with no problem. It's the main pulley on the engine. It has a big bolt at the center that holds the pulley onto the crank, that bolt needs to come off. Then the pulley (harmonic balancer) can come off

...the crank pulley is, remove all belts remove crank pulley big center bolt, get a harmonic balancer puller, or 3 jaw puller and remove pulley, there should be a woodruff key its small so dont lose ...

CRANK to bottom of middle PULLEY - top of middle PULLEY to bottom of rear TENSIONER - top of TENSIONER to back to top of CAM. Remember the serpentine belt has ribs on only one side, the ribs face AWAY

...cyl with ac...... start at crank pulley rib side around p/s pulley to alt pulley flat side on the left side of water pump then rib side around ac pulley flat side around tension pulley back to ...

crank is loose. If you find the pulley loose, if the bolt holes are not elongated, just tighten it back up. If the damper is loose, remove it from the engine (puller usually necessary) and inspect the

...crank pulley squealing on acceleration--- lost timing mark---wobbly pulley ---rubber coming out from between the pulley and the hub-- steps in the sides of the pulley if V belt--- worn out teeth if ...