...Copy 2) Select TEST MODE. 3) Select [8] PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [Set] key. 7) Press the [Stop/Reset] key (returning to the state ...
...Copy-# to enter SERVICE MODE 2) Select TEST MODE. 3) Select [8] PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [OK] key. 7) Press the [Stop/Reset] key ...
Question about MultiPASS F60 All-In-One InkJet Printer
Copy-# 2) Select TEST MODE. 3) Select [8] PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [Stop/Reset] key (returning to the state of 3)), and then press
...Copy 2) Select TEST MODE. 3) Select [8] PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [Set] key. 7) Press the [Stop/Reset] key (returning to the state ...
...Copy? Key Hit ?#? Key Scroll thru the menu headings until you come to ?Test Mode? - 12th heading Hit the ?3′ button- this will bring up Eeprom Clear Hit ?0′ button Hit the ?Stop? ...
Question about MultiPASS MP730 All-In-One InkJet Printer
...copy,# and got to test mode but hitting the #3 did not bring up the Eeprom Clear. Then hitting the "0" did nothing. Also there is no "stop" button only an on/off. Is there really a waste ink ...
Copy-# 2) Select TEST MODE. 3) Select [8] PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [OK] key. 7) Press the [Stop/Reset] key (returning to the state
Question about MultiPASS MP730 All-In-One InkJet Printer
...full" ? press menu - copy - # Select TEST MODE. Select [8] PRINTER TEST in TEST MODE. Select 3. [EEPROM CLEAR]. select 0. [INK COUNT]. press the [OK] key press stop to cancell restart the ...
Question about MultiPASS MP730 All-In-One InkJet Printer
Copy-# 2) Select TEST MODE. 3) Select [8] PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [OK] key. 7) Press the [Stop/Reset] key (returning to the state
Question about MultiPASS F80 All-In-One InkJet Printer
Copy-# 2) Select TEST MODE. 3) Select [8] PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [OK] key. 7) Press the [Stop/Reset] key (returning to the state
Usually answered in minutes!
427 Questions
315 Questions
121 Questions
111 Questions
109 Questions