Questions & Answers for: clutch band

Question about 30.1CC Chainsaw With a 14 In.bar and Chain

1 Answer

band seems tight around clutch but shortly after starting smoke comes out from under saw.I dont know if excessive but some oil on inside of clutch cover thanks It sounds like the band is too tight and

Ad

...band, front clutch and the overdrive direct clutch. To test the band, drive the truck in manual low up to 25 mph. Then let off, if the transmission doesn't pull the engine down, the band needs ...

Ad

...band and clutch movements is to, valve body off, use a variable air gun on different ports to apply them. There is a hole by each servo to check the band. There are holes along the front side of the ...

...band will not release to replace the clutch cover removed clutch cover to replace chain and I cannot get to release so I can reinstall clutch cover Hi there Sometimes that's not an easy job . I work ...

...band for reverse and second gear. Any second gear problems? Possibly shifting directly from first to third? Drop transmission pan and check for bits of clutch band (non- metallic debris) to

That's not supposed to be tight normally, that's the brake band. It locks up around the clutch drum to stop the chain if the chain brake is pushed forward. Pull the handle back, and it should release

Question about 1986 300ZX

1 Answer

...Clutch Band kit Chainsaws are equipped with a clutch band, a steel band that wraps around the clutch drum and is activated by the emergency stop lever. If the lever does not disengage the chain does ...

Question about 1991 Dynasty

1 Answer

...band will help the transmission to slow as well as the vehicle,but if the bands are loose and not tight enough,your clutch's will try to slow the vehicle,when this happens the clutch's will not hold ...

...clutch band doesn't fit I am guessing what you are calling the clutch band is the anti kickback brake. It is operated by a "lever" in front of the hand grip on the front of the saw. Pull that lever ...

Question about 1991 Dynasty

1 Answer

...clutch band over clutch You haven't stated the make and model of the saw, if its an inboard brake band then its easier to put it on firstly by removing the clutch drum, which is generally held on by ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...