Questions & Answers for: Mitsubishi c1 buttons

...Main PWB (schematic page 1/8). On mine, the 12V surface mount fuse, F3004 (2.3A) was open (quadrant C1 on the schematic). Replaced it, reassembled the projector (3 interlocks don't 'cha know) and it ...

mitsubishi tv we bought this tv and we had the remote controll while i was at work my daughter locked my dogs in the living room and they destroyed the remote to nothing so we were using the voume ...

TV Locked My Supra TV st29k22b is showing a key on screen and no button on the remote or the TV is working except the power buttons. I hope this helps, these unit were made by akai: here is the akai ...

I have a Mitsubishi VS-5004R and do not have tyhe code and cant unlock the tv I need a code to unlock my TV its a VS-5004R mitsubishi TV? Found this solution: This system can lock each channel or ...

What 2 buttons other than the Power button After replacing the lamp in an XD480U projector, what are the 2 buttons needed when pushing the power button, to reset the Interval of lamp replacement time?

After replacing the lamp in an XD480U projector, what are the 2 buttons needed when pushing the power button, to reset the Interval of lamp replacement time? The buttons to choose from are: Auto ...

...for only a few minutes and comes back again. turn off the closed captions or set the feature to c1 to view. they are set to text

tv blinks out when front buttons are pushed. model#ws-65511 power button does turn tv off an on,but all other buttons makes tv blink out as if channel was change If the TV is turning on and working ...

how to set up garage door opener on my 2002 diamante Detail Instructions from the owner's manual 1. Turn off engine 2. Prepare transmitter by erasing all three of the factory default channels by ...

the v chip locks up how do we remove this if dont have code for good on hd 1080 is there a code change to remove the original SETTING V-CHIP This TV is fitted with a V-CHIP controller which provides ...