Questions & Answers for: Jeep Comanche black and white

...wired properly dont know which wire goes where Hey Mark, Dark Green from ignition and Black/White go to relay coil. Red from battery to relay common Dark Green from starter solenoid to relay N.O. ...

...which is grounded to the bed. If you unplug the rear harness the truck will not start unless the black ground wire is attached to the

...replaced the started and the master cylindar. When i push on the gas it shoots out clouds of black. I think its running rich but i dont know how to fix it. Please help. First, make sure you ...

...back towards your lights this should take you right to it, if front then try un screwing the big black nut on top of the signal this should open both the headlight and turn signal.

How do you set the valves on a 1989 Jeep Comanche straight line 6? You have hydraulic lifters that do not need to be set. Make sure the pushrods are centered in the lifters and tighten the rocker ...

... Black/Yellow Right Front (+) - White Right Front (-) - Black Rear Speakers - 5 1/4" Tail Gate Left Rear (+) - Gray/White Left Rear (-) - Brown/White Right Rear (+) - White/Black Right Rear (-) - ...

how to remove a starter from an 89 jeep comanche First remove the black battery cable from the battery then remove the red cable. If you need to locate the starter follow the red cable to it. Once you

...black w white and blue /green. The harness I have now is black, red, red/black and orange. I need to know which wires go where so i can hook up the newer harness to the older wires. Thanks David I am ...

...good what im i missing here?????????? when left unplugged hear air swishing thru, it smokes very black smoke motor runs rough They are vacuum lines keep them plugged. Not all of them are used go

...1996. so you are the detector. do a full tune up. then look at spark tips. are the cream color or black.???????????? if black, post back. i still miss and loved my Comanche. (im 1/8 real Comanche ...