Questions & Answers for: Buick alternator belt

...belt from the alternator, as outlined in Section 1 of this manual. Detach the electrical connections from the alternator. Unfasten the alternator mounting bolt and mounting bolt and nut. Remove the ...

Need to get alternator off of a 1997 buick lesabre how do I loosen the belt? loosen the alternator bolts and slide the alternator to loosen belt

...belt is need to turn the alternator which is needed to charge the battery, after the battery starts the car the alternator charges the battery, if the belt is not present the alternater has no way to ...

...belt off the alternator pulley. Step 4. Locate and disconnect all the mounting bolts on the alternator, use a vehicle specific manual if you have any trouble. Step 5. Disconnect all wires attached to ...

...alternator belt Route the belt as shown below (from autozone.com) but leave it off of the alternator. Use an 18mm wrench or socket on the tensioner pulley and pull toward the front of the car. With ...

belt off, remove the big red wire going to the back of the alternator. Make sure that the big nut against the alternator doesn't more while your disconnecting the wire. After this or if there isn&

...belt from the alternator pulley 3. remove 2 alternator retaining bolts on either side of pulley 4. disconnect pos. and neg. battery connectors 5. remove alternator installation is the reverse of ...

...Alternator Drive Belt? http://schematicsdiagram.blogspot.com/2011/12/how-to-inspect-alternator-drive-belt.html----------- How to replace Alternator Drive Belt? ...

...belt on along with the alternator, I can't get the tension to ease up to put it on the pulley Do you have the tensioner arm pulled back with the special tool? The tensioner must be full ...

belt. Remove the wiring harness or connectors. Loosen and remove the alternator. Install the new alternator, making sure it fits and aligns with the bolt holes. Put your replacement belt on. Make sure