Questions & Answers for: Honda XLR 125 R how do i adjust the mixture

...mixture adjustment screw in or out until the fastest idle speed is attained. Then adjust the idle speed with the idle speed adjustment screw. Now ride at full power and see how well it performs. If ...

...mixture screw on a 1997 honda xlr 125cc Try to google some specs online, but a good starting point to get started is to close it all the way down, then open it one and a half turns. This will get you ...

...adjust the mixture screw 1/4 turn in or out to achieve maximum idle RPM, wait 15 seconds between each adjustment for the idle to settle. 7. Never go past 3 full turns out this will make the fuel ...

...sticking. 6. Float level too low. 7. Carburetor bowl vent line clogged/blocked/pinched. 8. Idle adjusting screw set too low. 9. Air/fuel mixture screw set too lean. 10. Idle port, transfer ports, ...

...sticking. 6. Float level too low. 7. Carburetor bowl vent line clogged/blocked/pinched. 8. Idle adjusting screw set too low. 9. Air/fuel mixture screw set too lean. 10. Idle port, transfer ports, ...