TCS, SLIP and ABS lights on TCS, SLIP and ABS lights go on after starting the car and remain on. Check your brake fluid first. If that is low, top it off and recheck. If its ok, than you will need one
Question about 2004 Altima
...ABS system/sensor having issues causing horrible sound when braking, but not a sound you expect to hear from say dirty brakes or rotors going bad. Was told you can't disengage the ABS, but is that ...
...sensor is bad or which ABS component is faulty. There is one wheel sensor at each wheel, directly over the exciter ring at each hub. If you want to scan the code yourself, you will need a Ford Super ...
do to get that abs light off ? A component of your abs system is likely bad. It may be and usually is an abs wheel sensor that goes bad. Have the abs trouble codes read to find out exactly what is bad
...abs/speed sensor problems ABS/VDS started behaving funny and then turned off. Took it to the shop - they say its the rear left abs sensor according to the codes. Sensor had to be ordered so I took it ...
...connections, dont want to purchase new sensor leads untill advice has been given if you did not remove the abs sensors before changing the bearings you probably broke then off of them. it happens a ...
abs sensor how do i unplug the abs sensor? it just clips out there is 1 on each wheel or just remove the fuse but then ur abs wont be active
...abs sensor. pass side rear abs sensor that is. Nissan has tech service bulletin for this to take brakes off and backing plate and clean of all corrosion build up on the rear spindle and replace abs ...
Question about 2004 Murano
...ABS sensor right front wheel". After replacement of ABS sensor the function was OK. After 100 m the ABS warning lamp turned on again. New code: "malfunction in the ABS sensor. my CAR: NISSAN MURANO ...
Usually answered in minutes!
1,587 Questions
1,450 Questions
1,309 Questions
1,122 Questions
1,306 Questions