Questions & Answers for: Isuzu Trooper 27 lb

2000 Isuzu Trooper Specs Can anyone tell me the connecting rod torque specs for a 2000 Isuzu Trooper, 3.5 engine? Either in foot pounds or newton meters?? Asap please. Tighten the connecting rod cap ...

cam shaft torques for caps and cover 3.0tdohc Bolts in the center of the cams 28.2 ft/lbs Bolts on the outside of the cams 15.9ft/lbs INSTALLATION 1. Cylinder head cover. 1) Install the cylinder head ...

...27 lb ft.) . Install the fuel pump assembly retaining screws. Install the fuel tank assembly. Fill the tank with fuel. Tighten the fuel filler cap. Connect the negative battery cable. REMOVAL ...

to replace rear discs do you undo the nut clockwise or anticlock and what torc do you tighten to Rightey tightey, Leftey Loosey. Caliper Attaching Bolts: Front 54 ft.lb Rear 32 ft.lb If you are ...

TORQUE SETTINGS FLYWHEEL 3.0 ISUZU TROOPER Engine code 4JG2 : 118Nm(87 lb/ft) 4JX1 : 1st stage tighten all to 59Nm(43lb/ft) then 2nd stage tighten all bolts a further 60 - 90 degrees

Hello and help, I need the main bearing, big end and flywheel torque settings for an Isuzu 3.1 td 1997, my manual only seems to have v6 petrol engines in it for some reason. many thanks Ron Jowett www

flywheel and presser plate torque specs for a 1991 isuzu trooper with 2.8l v6 The flywheel bolts call for 52 lb-ft, the pressure plate calls for 13 lb-ft. Tighten in a diagonal pattern, one or two ...

tourge spec 3.5 isuzu 2002 head bolts You did not give us engine model # so I am assuming the following:1998 to 2005 Isuzu 3.5 is a 6VE1 engine.Head bolt torque is 21.47 ft/lb (foot/pounds)

head bolts toruge spec 2002 isuzu tropper 3.5 21.47ft/lb

torque tightening isuzu trooper 3.2 sohc i need torque tightenig trooper 3.2 sohc m bolts15 foot lb 11mm bolts 47 foot lbs