My disk has a crack in it and put it togeather with glue and how do i get the disk to work

In times like this every penny counts, trying to budget your self is a must!.., Experience is the greatest gift that we earn. Not to long ago I found a small crack dot in my wife winshield, knowing that I'm in a buget I, over look it for a while. One day I notice that the crack has expande to a long thin crack line and getting worst? I couldn't afford to get a replacement winshield right at the moment so I thougt how to prevent from cracking more.. So I decide to use some type of epoxy or glue that will work in glass or ceramics. There is a quite of them in the market so I chose Super Glue or Krazy Glue wich they do bond good with glass or ceramics. First make sure that the crack or thin line to be glue is clean from debri or any other particules in the cracks, open your tube as dericted make sure you have a small piece of cleaning rag and a few Q tips. Dont forget to have a bit of acetone or like I do, I take some of my wife nail polish remover wich works good. Fill the crack or run the glue down the line of crack. Clean any dripping with the acetone or nail polish remover using some Qtips or cleaning rag, let dry and there you will have a temporary solution to prevent your glass from spreading the crack. the bonding agent of glue will keep glass from spreading more. But remember is just a temporary solution until you can fix it by replacing your winshield with the expertise of a tecnician <a href="http://commons.wikimedia.org/wiki/File:Super_Glue_tube.jpg">http://commons.wikimedia.org/wiki/File:Super_Glue_tube.jpg</a><br /> <br /> <br /> <br /><img src="josetapia162.jpg" />