Logitech quickcam zoom

HI,
Please get the driver here : www.multi-cam.net/camera_downloads.html
www.nodevice.com/driver/category/Digital_Cameras.html
www.nodevice.com/driver/category/PC_Camera.html

Kind Regards, Jay__m9k4bd5

If it worked before and doesnt work now uninstall it and then reinstall

found the following link for the Quickcam Zoom 8.4 software, but it shows that it only supports Windows 98, ME, 2000, and Xp ... there are no supported drivers/software for Vista or Windows 7. So if that is what is on your new PC then you will most likely need to get a new Cam or Contact Logitech directly to see if they have plans on releasing software for this cam for newer operating systems.

http://www.logitech.com/pub/techsupport/quickcam/qc848enu.exe

Good luck.

Just read the most wonder article on how toe fix your quickcam zoom for vista follow these steps

These is from 2007 post so you will have to google for the drivers mentioned. I did and it worked

I have a Logitech Quickcam Zoom and this is how I got it to work:
1. Install QuickCam 32-bit Version: 10.5.0 Build 1096b
It can be found here: http://www.logitech.com/index.cfm/downloads/software/CA/EN,CRID=1794,contentid=10234
2. When you get to the camera detection part where it asks you to plug in your camera, plug it into a new usb port (if you had it plugged in when you installed Vista) and just press skip.
3. Windows may try and find the driver for it, you can cancel that too.
4. Install the old QuickCam software (Version: 8.4.8 build 1034A)and overwrite anything it asks you to (it will fail to install completely because of the new version, but it will put the files you need into the Logitech program files directory.
The old software is here: http://www.logitech.com/index.cfm/downloads/software/CA/EN,CRID=1794,contentid=7649
5. Go to the windows orb (former start button), open control panel, go to system, then on the top left of the window click device manager.
6. Find the unknown usb device (hopefully you only have one... otherwise unplug anything else that doesn't work or you haven't updated the driver for yet)
7. Right click and select update driver, choose a location to find the driver, navigate your way to C:\Program Files\Logitech\QuickCamWebInstall\Drivers\WinNew\PRO2
8. Press OK or whatever, and let it install.
9. Enjoy!

Mine didn't even need to reboot and worked with the 10.5 QuickCapture software. Still need to test with Skype and Live Messenger though.

http://www.opendrivers.com/driver/233145/logitech-quickcam-chat-camera-quickcam-software-8.4.8-build-1034a-windows-98se-me-2000-xp-free-download.html

the above link has a driver. try downloadin it and check whether you are able to use your webcam

I haven cheked this ,

this is a patch to make your webcam compatible with vista.

try this 
http://www.logitech.com/pub/techsupport/quickcam/qc1150.exe

i m sorry if it doesn work becos i don ve the webcam to check wit the patch

Detailed Description This article covers whether a QuickCam work on a Macintosh computer.
Answer This article applies to the following operating systems:
Mac OS 10.1.5 - 10.2.6
NOTE: Later versions of OSX are not supported by QuickCam.
To use a Logitech camera on your Mac OS X computer, please consider the following models: QuickCam Orbit, QuickCam Pro 4000, QuickCam Zoom P/N 961325-0403, the Pocket Digital and the Pocket Digital 130. The Logitech Pocket Digital 130 is supported natively, so all you have to do is plug it in. You can then use it in iPhoto™, a program that comes with Mac OS® X.
To use the Pocket Digital, you must install the Pocket Digital driver, available HERE. You can then use it in iPhoto™, a program that comes with Mac OS® X.
If you would like to use any of the other cameras mentioned, you must install QuickCam 8.0.1, included with the camera.
NOTE: QuickCam 8.0.1 should only be installed in Mac OS 10.1.5 - 10.2.6.
Mac OS 9 (OS 9.0.4 - 9.2.2)
To use a Logitech camera on your Mac OS 9 computer, please consider the following models: QuickCam Pro 3000®, QuickCam® Pro 4000 and the QuickCam® for Notebooks Pro. In order for these cameras to work, you must install QuickCam 5.0.1, which is included with the camera. It is also available HERE.
For additional information regarding UVC camera support under Mac OS 10.4.9 please see article 6471




http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=51

Which cameras are compatible with MSN 6.0?
Below is a list of cameras that are compatible with MSN 6.0:
ClickSmart™ 820
ClickSmart™ 420
QuickCam® Cordless
QuickCam® Messenger
QuickCam® for Notebooks Pro
QuickCam® Pro 4000
QuickCam® Zoom
ClickSmart™ 510
QuickCam® Traveler
QuickCam® Web
ClickSmart™ 310
QuickCam® Express
QuickCam® for Notebooks
What are the Minimum System Requirements?
The minimum system requirements for MSN 6.0 are the following:

• 233MHz processor or faster (500MHz recommended)
• Microsoft Windows 98, Windows 2000, Windows ME, or Windows XP operating system
• Minimum 64MB of RAM (128MB recommended)
• Up to 50MB of hard disk space needed to install — after install, up to 15MB may be needed
• 256-color VGA or higher resolution graphics card (SVGA recommended)
• Minimum 800x600 screen resolution
• Microsoft® Internet Explorer version 5.01 or later must be installed on your computer, though it does not need to be your default browser

Note: If you are not sure if your computer meets these system requirements, please check with your computer manufacturer.
Where can I download MSN Messenger 6.0?
Click here to download MSN Messenger. Note: If you experience any problems downloading or installing MSN 6.0, please contact MSN for further support.

need your help have lost disc

http://www.softwarepatch.com/utilities/logitech-webcam-driver-quickcam.html

Try these, it works for me on Ultimate after a bit of compatibility tweaking (a lot of it on my account as I messed up the install and had to clean up the mess)

Try it out.