No picture, Standby blinks then goes out

Blinking of standby light to Sony TVs are fault indications. Technically this is called blinking codes. From the number of blinks that occur at one time switch ON, you can get an idea about he faulty circuit location inside it. If you wish to get more details, check this site. Pull up older posts there. Check the site with patience, as it has over 2350 posts now. All are related to electronic equipment repair help. Search the site by 'Timeslide' option. It will make search easy.

To know more about these blinking coded, visit the is site. It has details about blinking codes to many brand TVs. Pull up older posts.

fdfdfdfdfdfdf

The tv have blown electronic components Highvlotage deflection circuitries area.This tv is not an easy fix,must hire a tv Tech.get an estamate to troubleshoot and replace components,sorry could be anythings,if it just pop and fade picture away.Well LCD tv is pretty cheap these days,compare prices a new LCD tv or fix up the old DLP tv u determine.The cosmatic appearance,mean nothing in electronics devices.

hi sorry to say that the color tuner has gone out .

Diagnosis item
TIMER/STANDBY
Indicater
Number of blinks
Supposed malfunction Condition
Self-diagnosis
screen display,
Diagnosis item: Results
•Power not ON 0
[Standby Power Supply System]
F601 open.
R607 open.
Q601 short circuit
[Main Power Supply System]
IC601 and R612 are broken.
VDR601 short-circuit
Cannot turn on the power.
LED doesn't blink.
+B OCP detection 2times Short circuit of power supply system in each circuit.
Goes to the standby mode
Short circuit of +B line
2 : +B OCP 000
+B OVP detection 3 times
T603 pin 78 open.
R672 open.
Goes to the standby mode
Malfunction of power supply circuit
3 : +B OVP 000
Vertical deflection stop 4 times
IC1509(V out) is broken.
Q1505(V Pulse Buffer) is broken.
Raster goes to one line horizontally, Aand then video
signal is muted.
4 : V Stop 000
Video out abnormality detection 5 times
Video out, Q705, 732, 761 and others in C board
circuit.
Q218, 219, 220 (A board)
TIMER/STANDBY LED blinks approx. 30 seconds,
and then blinks for the self diagnosis.
5 : AKB 000
Horizontal deflection stop 6 times
C515, 516 open.
IC206(YC Jungle) is broken.
Raster doesn't appear. 6 : H Stop 000
Audio abnormality detection 8 times
IC406(Audio amp.) is broken.
PS401, 402 open.
The sound is not out.
Goes to the standby mode
8 : Audio 000

try adjusting your color tuners located inside tv behind speakers.

mine has just done the same thing, i had someone look at it and he said the picture had gone. its not worth repairing it as it cost more than the tv is worth. your better off buying a new tv.sorry.

I had this same problem and after doing some research, I removed the lamp, cleaned it and plugged it back in. It fixed my problem completely.

i also encountered such problem.. try to open and check the connections from the lcd, this maybe loosen.