What is the AMP for, and how do it work? - Huffy Ladies Karaoke Cruiser Bike With Amp White (26")

Check for a blown fuse----look at it & test it
Check for & TEST any fan relays-have to remove them to do so
Then unplug the cooling fan & put battery voltage to it

If the fuse is good,the relay works,the fan works,you may need
a wiring diagram & do some internet searching to find a temp sensor or switch--odds are it will be in the radiator or cooling system somewhere.

Check for wire connectors being off

Have to check the radiator for leaks & the coolant system
for leaks & at least partially remove the radiator, to get rid of
leaves & other road dibris,bird feathers & such

Check the wall outlet has poser and make sure the plug is fully inserted.

There are three ways to get out of this problem.
The options are:

Option1) If you are using All New Email try switching back to Classic to see if that will help.

How to switch back to mail classic
************************** **************
Under yourname(near sign out) at the top of your Yahoo! Mail page, there's a Mail Classic link. Click Mail Classic to go back to the Yahoo! Mail version you're already familiar with.
http://i471.photobucket.com/albums/rr74/...

If it doesn't work, Click the direct link to return back to classic mail and click "yes" button.

??????????????????????????????

Option2) If you are having problems with your email and need technical help contact customer care at:

Yahoo! Mail Technical Help Form
http://help.yahoo.com/l/us/yahoo/mail/ya...

Yahoo! Customer Service
866-562-7219
408-349-3300
408.349.1572

The E-Mail address for Yahoo!customer care is
[email protected]
or
[email protected] (no "e" in answrs is correct)

Hope some of this info helps!!!
??????????????????????????????

Option3) Yahoo has been notified about this problem and said they are working on the problem. In the meantime, you can use one of these links, it's basic, no frills, but it works. http://us.m.yahoo.com/p/mail or; http://uk.m.yahoo.com/p/mail

• 2 years ago

Can somebody please help me.

I am trying to log into ebuddy. I downloaded the software onto my Blackberry 8110 and then when I click the icon it says "Connection Failed" Your internet settings must be activated for Java Applications, or try again later. Check your phone manual or go to the website (unfortunately I cannot add the link) on how to do this. If this doesn't work you can always use our Lite Messenger".

Now I dont know how to activate Java Applications on my phone. I cant remember how to get to it either. Can someone please point me in the right directionon how to do this.

If I go to the Lite Messenger on the browser it works fine.

Thanks in advance for any help given.

s-m

о мой бог i' m идя убить вашу семью

OK PEET,
NOW TELL ME WHAT HAPPEND ?is the drawer open and close normaly?if yes observe if cd run few turns and what happend.
we wont buy original parts and we can buy alternative chinese cd driver and i think you dont need buy the whole cd drive unit sometimes it will be ok with replacing one of circuit board with alternative circuit.
anyway first of all we will try to repair the current.
nuwan.

Sound's like you have some sort of a short or an open, somewhere, i would first check your fuse box,
in your engine and in your dash with a test light. make sure all fuses are working, if you had an open or short it could be possible you blew various fuses with a certain surge of power..
Second.. if you have an aftermarket sterio and all said before turns out alright. then i would pull out and check the wiring in the sterio and all surrounding it, one could have been rubbing up on another bare wire or ground out.

good luck..

try this 3213643222

Try pressing the "copy" button and then the black "start" button. I did this a couple of times and the printer started working again.

Other people have had success when they open the lid, pull down the gate (to expose the cartridges) and then push in the little button on the left (to fool the printer into thinking the lid is closed). With that button pushed in, try pressing the "copy" button and then the black "start" button. The printer will make some working noises. When you close everything up again, it should work.

Hi very simple to rectify,all you have to do is press and hold enter and 1 on the remote control for at least 2seconds.if this does not work use the same steps but press enter and 2.should work for you