How do i switch photos from internal memory to a memory card

Information is not clear; however, if you mean to clear contents (photos, movies) from the internal memory, try the following.
1. Switch off, remove the SD card, re-start the camera.
2. Switch to playback mode; there you will find the photos/ videos stored in the internal memory. Manipulation of those media is normal.

Delete the photos off the internal memory and remove the battery. this will reset it the factory setting and that should clear it up

Copy your photos from internal memory to memory card by following the instructions on this page of the user guide.

The settings you need to to do is to choose the storage mode to "Auto" or memory card (looks like you have it set to internal).

• For the Auto it will use the internal then switch to the memory card when the internal is full
• For the memory everything goes straight to the memory card.

Good luck and let me know of the outcome

I'm glad to provide the steps to transfer images from Internal Memory of the Camera. When the camera does not have a memory card in it, the images are saved by default to the camera's internal memory, which holds different amounts of images based on how many megapixels are built into the internal memory and what image quality and compression are selected in the camera's menu. Once a memory\picture card is inserted in the camera, the camera then saves the photos to the memory\picture card and ignores the internal memory.

There are two ways to transfer the images from the internal memory.

• To transfer photos to a computer from the internal memory using the USB cable, first remove the memory card from the camera. Then, when the camera is connected, the computer and software will only see what is in the internal memory and transfer those photos or videos. During the transfer process, the computer makes copies of the photos and videos-the original images remain in the internal memory. After the transfer is complete and the camera is safely disconnected from the computer, the contents of the internal memory can be deleted by using the MEMORY FORMAT function in the SETUP menu in the camera's menus.

• The other way to transfer photos from the internal memory is to transfer them to the memory\picture card using the BACKUP function in the SETUP menu. If there is no memory\picture card in the camera, the BACKUP function is grayed-out. During BACKUP, copies of the images are transferred to the memory\picture card-the original images remain in the internal memory. After the BACKUP is complete, the internal memory can be cleared by removing the memory\picture card and formatting the internal memory using the MEMORY FORMAT function in the SETUP menu in the camera's menus.

Note: When the camera is connected to a computer using the USB cable with a memory\picture card in the memory\picture card slot, the computer will only see the contents of the memory\picture card.

Thanks for understanding. Please let me know if you require any additional help.

Probably one of two solutions.
First, the memory card should have all the pictures intact. If you are using the camera to review, you may need to just keep going back until the memory card photos show.
Another possibility is that the internal memory supersedes viewing the card memories. You may have to run a USB cable to your computer, download the internal memory photos, and then you can possibly see (on the camera) the memory card photos. It might be a good idea to download those photos to your computer too, if the computer has a memory card slot. Otherwise you will have to go through them and download via the USB again. Once you know the photos are saved, you can either change cards with a new one , or clear the old card and start again.
Good Luck

First, promise to never use the internal memory again. Go into the menu and there should be an entry for "copy" which should allow you to copy the internal memory to a memory card. After that, you should "format" the camera with no card inserted to erase the internal memory.

OK, you can switch to your memory card's memory if you have one installed. The Internal memory is sparse and small compared to say a 2 gigabyte memory card.

Also, delete the internal memory pictures if you're set on using that type of memory.

on a kodak you can also copy your internal photos to card-go to menu and find menu highlight that says storage or something like that and change setting to use card first-when the camera has a card in it it will usuallt default to card first

Talking about the Camera only here Check the manual for internal memory use. Put the memory card in. Use the menu button to switch between internal and card If your computer is XP you do not actually need any software to read the camera. Check the manual re this