Error code E9 on a HK654070XB vitro cooking plate

Check your Manuel if you dont have it put your model number and error code to google

Rohit, this is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

Rohit, this is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

Hi I have the same HOB, DEFY DHD406. The back left plate sensor doesn't seem to pick up my finger when I press it. The hob is brand new. All the other plates work except one

Tthis is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

I had a look and all I found was for a Prestige cooktop?? E9 apparently means a failure of one of the temperature sensors but not sure which one... Sorry.

Hello there

Sounds like a 'gas sensor' (whatever that is) error. I recommend calling Samsung Support or a qualified Microwave Technician


SMH2117S/XAA Microwave Is Displaying An Error Code If your microwave is displaying an error code, such as -SE-, E-11, E-12, E-13, or E-14, or any other trouble code not listed here, cycle the power to the microwave by either unplugging the unit, or cycling the circuit breaker for approximately 60 seconds before restoring power.
If the above suggestion does not work,and the error code returns, your microwave will require service.

Ihave a sunflame induction cooker. Whenever i start after 2 min it shoes e9 and stop working what is the reason

did you get it fixed?