My 1690 don't start black screen. - Acer Aspire 1690 Notebook

Garmin nuLink 1690 LIVE Factory Reset GPS Nation Admin posted this on Aug 5, 2015

Note: A master reset will erase all favorites1 and will restore your device to the default factory settings. If you would like to back up your favorites to your computer, you can find instructions to do so here.
To perform a master reset on a nuvi 200, 205, 405, 500, 600, 700, 705, 1100, 1200, 1300, 1400 series, 1690, 1695, 2300 LIVE series, zumo 220, 450, 550, 660, and 665:

1. Start with the device OFF and unplugged from power
2. Touch and hold the lower right corner of the screen with an index finger or the eraser end of a pencil
3. Continue touching and holding the lower right hand corner of the screen then power the device ON
4. Release the power button when the device powers ON
5. You will see a new message: "Do you really want to erase all user data?"
6. Remove your finger from the touch screen when this message displays
7. Touch Yes
   • If text language is not in English, this is the button on the right

The device will now reset. Follow the on-screen prompts and then place your device in an area with a clear view of the sky until it acquires satellites.
1Although the master reset will erase all saved favorites, any loaded custom points of interest will remain intact on the device.

All acer 1690 drivers


http://www.driverstock.com/Acer-Aspire-1690-driver-download/4-21-12844/index.html

Here are the manuals for your GPS.

• Owner's Manual (190-01099-00) Rev. C, Nov, 2009 Download (1.38 MB)
• Quick Start Manual (190-01099-01) Rev. C, Aug, 2009 Download (706 KB)

Good Luck

You have to re-install fresh XP on it

Defective CCFL backlight, it may have the following symptom: Screen flashs on red/pink and off. Picture stays on in red and slowly be come normal. Picture flickering with dim display or appear black. Picture flickering on and off. All these symptoms indicate that the LCD backlight lamp (CCFL Lamp) has reached the end of the life and all you need to do is replacing the CCFL lamp.
Connect an external monitor to your laptop and power the monitor up first then the laptop, if you see the normal Windows images then the video card and laptop is OK and the problem is definitely the backlight. Dim image and/or dark display on the laptop's LCD screen indicates a faulty LCD backlight and it could be the inverter that supplies high voltage to the CCFL lamp or it is the CCLF lamp is nearly burnt out or burnt out, most likely this is the case.
The inverter can be replaced easily but the CCLF lamp is more time consuming and requires soldering skills.
Check out
www.lcdparts.net
for parts, repair service and DIY info.

Hello,

Contact with notebook repairing engineer. Might be coz of some short circuit, BIOS corruption or any malfunction of the hardware.


Regards;
Hassan

I think your problem is because the monitor is not activated. Right click desktop, click properties, click settings. Drag the gray scaled monitor on top of the black monitor and click ok and it should send the signal to the external monitor. try draging the mouse over to it because by default the external screen will be black.

Hope this helps!

Sounds like your number lock maybe be on. It could also have a shortcut function option that is on. If not, have you spilled anything on it lately?

Similar problem
started a few days back

I have extra screen for you... Do you want to buy it? The numbers on the my screen are EDMMRF7KAS, QK1-1690-01 and KA59QH0770417...