My kodak don't turn on with new replacement bactery

Sounds like the pump may have failed. Various ideas in the link

https://www.google.com/search?q=Purell+ES6+hand+sanitizer+pump+not+working

..

child lock is on

To enable the Child Lock feature: Press and hold RACK DRY and ANTI BACTERIAL for 2 seconds. A single DEEP Tone is heard, and CL is displayed. To unlock, press and hold RACK DRY and ANTI BACTERIAL for 2 seconds. The indicator light turns off.

i hope this was useful

Algea/slime/yuk. Clean everything and reassemble.

Here are a few brands of chemical filtration that you may want to look into -

http://www.filtersfast.com/P-Fluval-Ammonia-Remover-2800-grams-98oz-Kit.asp

http://www.filtersfast.com/P-AquaClear-70-Ammonia-Remover-Kit.asp

is it notifieing you that there is a lens eror? or does it just not turn on? This type of problem you won't be able to fix yourself, and don't try to either! You will need to contact Kodak and tell them there is a lens eror (don't give details that you shouldn't be giving), hopefully they will be willing to fix it for you or replace with refurb.

it might be the fault of the starting integrated circuit (I.C) better replace it if it blown the cam too might sometimes restart and then gets off when it gets heated.

Ifthis solution helpful/useful for you please rate the solution. THANKS FOR USINGFIXYA.

To resolve the issue:

1. Make sure you install the correct type of KODAK Ink Cartridge for your printer. Currently we offer two types of ink cartridges (10 Series and 30 Series). Installing the wrong type of ink cartridge may result in this error. You will need to install a new, correct type of KODAK Ink Cartridge.
   NOTE: For more information, see Which ink cartridges to buy for all-in-one printer.
2. If you are using the correct type of KODAK Ink Cartridge, reinstall the color ink cartridge.
   1. Open the printer access door.
      NOTE: If the ink cartridges don't move to the center, see Printhead and ink cartridges don't move to center with access door open.
   2. Wait until the printhead is idle and silent, then pinch the latch on the color ink cartridge with your thumb and forefinger and lift it out of the printhead.
   3. Install the color ink cartridge back into the printer, making sure to press down on the thumb tab until it clicks into place.
   4. Close the printer access door. For printers with LCDs, follow the instructions on the LCD screen.
      For more information on installing ink cartridges, see the Extended User Guide for your printer. Review Maintaining Your Printer - Replacing ink cartridges.
3. If the error continues, restart your printer:
   1. Turn off the printer by pressing the power button.
   2. Wait five seconds.
   3. Turn on the printer.
4. If the error continues, and you have extra, new KODAK Ink Cartridges on-hand, try to install a new ink cartridge (or a set of new ink cartridges).
5. If the error continues, contact us.

When the issue is resolved, we highly recommend that you upgrade the firmware for your printer for optimum performance:

1. Locate and select the firmware for your printer.
2. Follow the instructions to install the firmware.

Source: http://support.en.kodak.co.uk/app/answers/detail/a_id/39315/selected/true

see link for instrauctions

http://support.en.kodak.com/app/answers/detail/a_id/1336/selected/true

thanx

I had the same problem and was able to find a replacement lock and spring on e-bay from US Camera - P/N 370388337496). They may have none left. Not sure.

I have no instructions on how to install the replacement, but don't think it should be that hard (haven't installed mine yet). It is called a Kodak DX7630 Battery Latch and Spring Assembly.

You can also contact United Camera Customer Service (1-630-595-2525) and talk with them. They are the company that Kodak will send you to for repairs to your DX7630.

The part number From Kodak PartsDepartment (1-800-431-7278 (opt #2) is: F6170 for the latch. The did not have any springs on hand.

I've got the same blinking "Err" message on the top screen of my Kodak DCS SLR/n. And camera don't working at all (menu displays only)
I was thinking that is mechanical fault. But in service centre (not official because I living in Russia and there`s no official service centre that would help me) engeneer tell me that mainboard was broken and replacement cost will be about $700. So I'm buy new one.
If you live in the USA you can contact official Kodak service. I believe that cost of repair won't be more than half of new one.