7 inch digital picture frame

Hi
First of all try another power unit and if you did so and it still not working I think that maybe micro fuse inside burned off and you must open the cover to see it

Try the simple stuff first ... turn the picture frame off. Then remove the AC power adapter from the a/c socket in the wall. Wait 30 seconds then plug the adapter back into the wall outlet. Turn your picture frame back on and notice any error messages that may get displayed.

hi
try to see if you have a reset hole in the back or sides if not then try to reconect the battary or to empty the battary .

Try recharging it, if you have a cord to plug in the wall or a usb cord to your computer, it should work as well.
I hope this helps.

Hello,

I would think sometimes it requires time to Charge the Battery before happy face on screen comes on...loL :). Try to plug in adapter cable, or power cable, and leave it plugged in for a bit. Then try again later :)

It's the power adapter... I had the same problem as of yesterday and today I used the power supply from my HDTV and it worked as good as new. Will have to go out tomorrow and get a new power supply.

There is a fuse in tvs I've had to change one myself

Mine does this when the power cord shorts itself out. For a whileI could fix it by simply untwisting the cord close to the plug, but eventually I had to cut and splice the cord to keep the lines separate (think a bunch of electrical tape. It works fine now that the cord isn't shorting out. Hope this helps!

please try these troubleshooting steps:

1. Turn the frame off.
2. Unplug the power cable from the wall outlet.
3. Remove any memory card or flash disk from the frame.
4. Connect the power cable directly to a wall outlet.
5. Turn the frame on.
6. Use a paper clip to press the button inside the pinhole on the back of the frame.

If after trying the above steps and the frame still have the same problem, then we need
to send the frame in for a repair as per warranty guidelines.

Your frame will be repaired per warranty guidelines. A product is warranted for 1 year from the date-of-purchase. For an In-Warranty repair, a “Proof-of-Purchase” is required. If the repair center finds any customer induced damaged, the warranty will be voided and you will receive a notification from the repair center in such cases.

Process the repair at www.kodak.com/go/itg

there must be abreak in wires of in put cord