Is there a replacement seal kit for the baking pan, or a new replacement baking pan available for model # b1561 black & decker bread maker

It's likely a harder, heat resistant type of plastic and the breadmaker does not get hot enough to cause the paddle to release any toxic chemicals.

You may be able to order a paddle for your Black & Decker B1561 Bread Maker from this site:

http://www.abtecparts.com/Black_&_Decker_breadmaker_paddles.htm

Before ordering you may wish to inquire whether the Paddle 500 is a suitable replacement for the B1561 or if they can supply the correct part.

Replacement parts for the Black & Decker B1561 Bread Maker are available here:

http://www.directpartsandproducts.com/bread-makers-b1561-c-1_96_97.html

Your Use & Care Manual is available here:

http://useandcaremanuals.com/pdf/B1561241.pdf

Your machine produces a 1.5 lb. loaf.

here is a website that has your paddle, this is the page from that website showing your paddle:

http://www.vendio.com/stores/breadmakerguru/category/b1561/catId=3449481

Hi, The sealed bearing and paddle shaft can not be repaired. You will need to purchase a new bread pan..... Sorry. Hank

Your model number for the all in one pro should be a B1650 (single paddle model)

If that is correct then this is one source for the paddle:

http://www.abtecparts.com/commerce/search/products/?product_id=01XBD42959200&merchant_id=1933

An informationl note about Black and Decker products is that there are replacement parts for anything they make as long as they have no discontinued the model number. Once the model number is discontinued they have aftermarket replacement parts for 5 years only.
(your replacement paddle is starting to show up as no longer available)

The orignal paddle part number is: 429592-00

Here is a 2nd source for the paddle:
(96 in stock)

http://www.radioequip.com/servlet/the-Home-Appliances-cln-Black-and-Decker-cln-Bread-Makers/Categories
Thanks for using FixYa:

Kelly

There is a sealed bearing in the bottom of the bread pan. The paddle sits on the sealed bearing shaft. Over time the bearing begins to fail and the paddle does not turn freely or it may even freeze up. If you are sure everything is installed correctly this may be the problem. See if the paddle moves freely by hand and is not really loose. Sealed bearings can not be replaced. Eventually you will need a new bread pan. Sorry Hank

well use less baking powder and preheat the owven

I work for Black & Decker customer support. Our number is 800-231-9786.

Please call the above number so that we can check the availability of the part you need. We no longer make that model so the part may no longer be available.
I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please let me know if I can be of further assistance.