I generally fix this by re-seating the bulb housing. Take it out and put it back in. Look for cracking at the base of the bulb on the mirrored surface. It could be a barely functioning bulb that isn't busted, but can't initialize. I would take it to a shop that has the same bub type in a housing and make a quick switch.
704 views
Usually answered in minutes!
I have the Infocus Screenplay 4805. The projector would not come on so I went to the manuel to see if I could troubleshhot what the problem was. I found the pages that talked about the red blinking light. Mine was blinking twice, which meant reached lamp hours, replace lamp and reset counter. I replaces lamp, and projector still will not turn on. Red light still blinking twice. Help!!
Baeron
When trying to use our projector, it starts up fine, but shuts off after about a minute and wont power on again for 30 minutes or so. The bulb was replaced about 2 months ago.
When trying to use our projector, it starts up fine, but shuts off after about a minute and wont power on again for 30 minutes or so. The bulb was replaced about 2 months ago.
the projector was working and then all of a sudden it stopped working. Th epower light does not blink or do anything. i have tried it with a different wire but it still does not turn on.
×