Need to remove panel to access spring on detergent dispenser lid on hotpoint dishwasher

The detergent dispenser lid spring may be stuck or the solenoid faulty. Might have to replace the detergent dispenser.

Best to check which one of these two might fit your model.

http://www.whirlpoolpartsonline.com/dishwasher.html?cat=35

make this tests and fix it. God bless you

Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Container

If the dishwasher dispenser doesn't work the detergent container may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Main Control Board

The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

follow this steps and fix it. God bless you

Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Container

If the dishwasher dispenser doesn't work the detergent container may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Main Control Board

The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.

Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.

Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.

Detergent Container

If the dishwasher dispenser doesn't work the detergent container may need to be replaced.

Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.

Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.

Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.

Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.

Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.

Enter your model number to see parts for your dishwasher.

Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.

Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.

Enter your model number to see parts for your dishwasher.

Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.

Enter your model number to see parts for your dishwasher.

Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.

Enter your model number to see parts for your dishwasher.

Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.

Enter your model number to see parts for your dishwasher.

Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.

Enter your model number to see parts for your dishwasher.

Main Control Board

The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

God bless you . see the photo attached.

Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.

Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.

Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.

Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.

Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.

Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.

Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.

Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.

Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.

Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.

Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.

Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.

Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.

Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.

Main Control Board

The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

Gd bless you

Hi,
There are three common problems that cause the Soap Dispenser or Cup not toopen. I have a tip that will explain these problems in detail....

Dishwasher Repair Problem Detergent Cup does not Open

heatman101

An automatic dishwasher detergent dispenser door can become stuck for a few different reasons. Some problems are easy to fix, while some require more work. Repairs are basically the same no matter what brand of automatic dishwasher you have, although specific parts might be required. Fortunately, even if the detergent dispenser needs to be replaced, the problem is not an emergency. The dishwasher will clean dishes fine even with a stuck detergent dispenser.

Fixing a Stuck Automatic Dishwasher Detergent Dispenser
1. Step 1 Move the basket that holds silverware as far from the detergent dispenser as possible, or make sure no tall items are blocking the dispenser. Also, keep other items such as plates and pans away from the dispenser. Anything that winds up touching the dispenser during the wash cycle can cause the dispenser door to stay closed. Run the dishwasher to see if this solves the problem.
   
2. Step 2 Remove the front door panel according to your instruction manual, or find the manufacturer's instructions online, which will probably be in a PDF file. The panel is typically held on by 6 to 8 screws along the edge, which you can see when the door is open. With most models, you won't need to remove the screws at the bottom of the door, which are part of the hinge assembly.
   
3. Step 3 Clean the detergent dispenser thoroughly from the inside of the dishwasher and the exterior side as well. Accumulated detergent and other material can interfere with the spring mechanism or halt the pivot action of the door. Use very hot water and a micro-sized brush. You also can use a mix of hot water and vinegar.
   
4. Step 4 Most dispensers have a bimetallic strip or switch, attached by screws, which triggers the door release. With the front door panel removed, locate the switch, and push on it gently with a screwdriver until the dispenser door opens. You might simply need to adjust the alignment of the switch.
   
5. Step 5 Purchase a new switch if re-aligning the old one does not fix the problem. Typically, these switches cost under $10. See Resources for a link to different manufacturers where you can buy the part.
   
6. Step 6 Label the two wires connected to the switch so you can correctly reconnect them afterward, and then remove them from the terminals by holding the slip-on connectors --- not the wires --- and pulling firmly. Use a pair of needle-nosed pliers for a better grip. Then remove the switch from the dispenser by removing the screws holding it in place. Connect the wires to the terminals of the new switch, and attach the new switch to the detergent dispenser. Replace the door panel.
   
7. Step 7 Run the dishwasher again to see if the switch replacement has done the trick. If not, decide whether to replace the entire dispenser according to the manufacturer's instructions, or call a repair technician.
   

Hello, I worked on a problem like this a few days ago. Your problem is going to be a blockage in the inlet to the drum. To fix this problem find the inlet pipe normally located above the door behid a flap of rubber..push your fingers up there to see if you can feel a blockage..If not your going to have to remove the lid of the machine to access the pipe that leads from the detergent drawer to the tub. Look at the rear top of the machine..You will see three screws....remove them and push back and lift the top panel (lid) now you should be able to access the pipe. Pull the pipe off and clean it out, i suspect you will find a sock blocking the pipe :) If you have any other questions or concerns please feel free to comment again. Good Luck! Mike

The dispenser is usually mounted by a series of screws from the INSIDE of the door panel. You need to turn the breaker off to the dishwasher, open the door, and remove the inside door panel to access the dispenser. There also should be a couple of electric connectors going to the dispenser motor. Use care not to pull the wires when removing the panel. HINT: If your dishwasher is like most dishwashers, the door will try to close on you from the tension of the door springs. You can disconnect the door springs, which may require unmounting the dishwasher from its under-counter position, or you can make this process easier, by finding something to prop the door open with. I usually use a thick dowel rod, or cut off broom handle to prop the door open against the cabinet. I hope this helps you. If you need further assistance, please let me know.

PS For future reference, please post your complete model number when submitting questions about your applainces. This makes the process of assisting you much easier as all makes and models are NOT made the same.

It seems to me that there isn't any problem with the normal washing cycle. The problem you have could be related to your dishwasher's detergant dispenser lid. I reckon that the relevant part isn't functioning normally. You can simply check out the claws placed on the detergant lid. If there is a spring inside, it might be damaged.