Water in my ge wont stop running

Hi Beranadette,

its water inlet solenoid vave problem,
ask technician to rectify it or replace it.

regards.
nuwan

try taking every thing out of the fridge turning it off for a day to let it defrost

The dishwasher control panel must be defective, nothing else would cause this.

the heater is not designed to heat wter from cpold to hot. it is only designed to maintain the hot waterb temperature. your problemis that the initial water going in is probably cold. you have to run faucet until it gets hot then start the machine.

Replace water inlet valve, it's stuck open. You may try removing hoses to valve and see if something is holding it open

Your water fill (mixer) valve is failed in the open position.
CLICK HERE for the part.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Find the tube from the tub to the water level switch. Remove the tube from the switch and blow the sand and stuff out the line. Pump out any water in the washer and restart.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

You need a new water inlet valve. this will fix it.

check water valve

check to see it the resevevouir tank is frozen up inside of the refrigerator, alspo check the the holse ruunning thru thre left door may be kinked. or the wter solenoid may have stopped working . Hope that one of these works out for you. Thanks for using FixYa and have a Merry Christmas!!