Ns-lcd32 won't turn on remotely or manually

Cheryl, I will post links to what the T con board looks like so when you remove the rear panel from TV, you will be able to compare and find it easily.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

LCD TV Repair Tutorial Con Board Common Symptoms Solutions How to Replace...

INSIGNIA NS LCD32 Con Board LC320W01 SLA1 6870C 0142B 2L

Amazon com INSIGNIA NS LCD32 CON BOARD CPT 320WF01C SD Electronics

Try this solution by another user:

timyorba 1 solutions Jul 21, 2011
So, For anybody who doesn't know yet, you do not need the factory remote to restore button functions to your Insignia IS-LCDTV26. All you need to do is program a universal remote that can power on and off the TV, then

"**press the "MUTE" Button 10 times successively**"

and Voila! Unlocked, you should see the status appear in the corner of the TV if everything worked, if not try another tv code or try the manual search function on the remote to find another compatible code set.

You are going to need an original remote for that set.

Unfortuntly you have a panel that is going out. This is not cost effective to fix.

Most likely either the main board (processes all signal) or even an issue with the power board (supplies wrong voltage somewhere).

In either case not cheap.

You can use the TV buttons to get access to close caption by pressing menu, volume up or down to select setup when you get to setup press channel down to close caption and use volume up or down to turn it on.
Let me know if you need further assistance.

Try looking here:
www.shopjimmy.com

Since you are getting the signal from the satellite, leave the satellite receiver ON and press input on the TV buttons until you get the signal back, wait 2 seconds after pressing the input button. Make sure the TV is on channel 3 if you are using the antenna input.
Let me know if you need further assistance.

You can download the manuals from the Insignia website at:
http://www.insignia-products.com/c-14-lcd-televisions.aspx
Jerry

I had this problem as well. Actually best buy just left my hosue to fix it. This is the second time they were here to fix it. The first time they said a part was loose. This time they had to replace a part.