Connection to I Pod touch from PC desktop computer Unable to connect

Make sure you have internet connected to the DLink first. You will need a PC to configure the DLink i.e DHCP, SSID, Webkey, etc. Then, you can set your ipod to connect to your DLink.

Check the wireless router and high-speed modem.

If the two are not powered on, or if the Ethernet cable connected the two is not completely inserted into both connection ports, you are unable to access the Internet on the Acer Aspire One laptop computer.

Activate the wireless Internet connection on the laptop computer.

Right-click the wireless icon on the desktop, then choose "Enable" from the pop-up menu.

Without activating the wireless receiver on the Acer Aspire One, the laptop is unable to detect any wireless network.

Select the appropriate network you wish to connect to.

Your computer may be attempting to connect to a different Internet connection, preventing you from access the network you desire. Right-click the wireless icon, select "Search for available wireless networks," then choose the network you want to access.

Restart the computer.

The system may have booted and failed to detect the wireless receiver. Restarting the computer corrects this issue.

hope this helps

In your wireless management tab, select "forget connection". Select your network to connect to, enter password information, and you should be good to go.

make sure your wifi is on, in the settings.hope it helps.

1. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPod touch to turn off.
2. Press and hold the Home button while reconnecting the USB cable to iPod. When you reconnect the USB to iPod, the device should then power on. 
   
3. Continue holding the Home button while iPod starts up. While starting up, you will see the Apple logo.
4. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
5. Restore and it'll download ~240mb firmware and you're done

Warning: you will lose all your data   

I'm having the same problem, have you been able to solve it yet?

their is a reset button on the back or on the bottom u will need a neddle or something like that to reset it

Hi i am Naren. You want to brow an your laptop

ok,
A software is use to download songs to your apple ipod colled "itons" so, first download the software from the above link and than install tham to your computer.



download from-----



https://swdlp.apple.com/cgi-bin/WebObjects/SoftwareDownloadApp.woa/355/wo/GS6ut2tbbon1ib60QWf7xg/2.5 



note - for any problem using this software contact me.



Thanks

Hey jindas316,

According to information provided by Apple, any content that you download to your iPod from the iTunes Wi-Fi Music store is automatically copied to your iTunes library when you next sync your iPod to your computer. You generally do not need a remote connection to your home computer or iTunes running in order to do this, so you should only need to have access to a Wi-Fi connection to download iTunes content.

Please keep in mind though that you may not have access to the same range of iTunes content through the Wi-Fi store as you do through your home computer. Movies, podcasts and TV shows are normally only available through the full iTunes store accessible on home computers.

Hope this helps you out.

Sincerely,
Aaron
Go Ahead. Use Us.